OEM 2005 Chevrolet Astro Bumper

2005 Chevrolet Astro Bumper Parts Questions & Experts Answers

• Q: How to replace the front bumper fascia on 2005 Chevrolet Astro?

  A: You need to eliminate the grille as the initial step before replacing the front bumper fascia. Raise and stabilize the vehicle after that. You must separate the front bumper fascia from bumper lower brace bolts then remove the front bumper fascia to fender bolts and finally disengage the front bumper fascia to impact bar push-in retainers. The FRONT BUMPER FASCIA should be separated from the impact bar next. Start installation by placing the front bumper fascia onto the impact bar and fasten it securely with push-in retainers. Study and apply the provided fastener notice to establish correct installation procedures. You must start by fixing the front bumper fascia onto the fender bolts before securing them at 6 N.m (53 lb in) torque while continuing with the bumper lower brace bolt installation at 6 N.m (53 lb in) torque. Next proceed with reinstalling the grille followed by lower vehicle position.