How to replace the Brake Light Switch on 2006 Buick Terraza?

Begin replacement of the brake pedal position sensor by removing the instrument panel insulator. Without removing the connector, push the position assurance hook aside then disconnect the wiring connection. Take out the brake pedal position sensor by unscrewing its fixture first. Use GM approved part 12345493 adhesive to stick the screw while placing the sensor fork on the pin and rotating the sensor until the locator hits the extension bracket hole. Tighten the brake pedal position sensor screw to 2 N.m (18 lb in) while positioning it correctly. Plug the electrical connection into the port while aligning the CPA accessory with its designated contact point. Complete the sensor adjustment then replace the I/P insulator.

OEM 2006 Buick Terraza Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2006 Buick Terraza Stoplamp Switch Part Number: 89060201
$14.55 MSRP: $25.98
You Save: $11.43 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Brake Pedal Position; Brake Light Switch
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.5 x 1.9 x 1.5 inches
- Condition: New
- SKU: 89060201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Buick Terraza Brake Light Switch

With a comprehensive array of OEM 2006 Buick Terraza Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Terraza Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Terraza Brake Light Switch Parts and Q&A

Q: How to replace the Brake Light Switch on 2006 Buick Terraza?
A: Begin replacement of the brake pedal position sensor by removing the instrument panel insulator. Without removing the connector, push the position assurance hook aside then disconnect the wiring connection. Take out the brake pedal position sensor by unscrewing its fixture first. Use GM approved part 12345493 adhesive to stick the screw while placing the sensor fork on the pin and rotating the sensor until the locator hits the extension bracket hole. Tighten the brake pedal position sensor screw to 2 N.m (18 lb in) while positioning it correctly. Plug the electrical connection into the port while aligning the CPA accessory with its designated contact point. Complete the sensor adjustment then replace the I/P insulator.