How to replace the Mass Air Flow Sensor on 2006 Buick Terraza?

The procedure for replacing the Mass Air Flow Sensor (MAF sensor) begins when you switch off ignition power then remove the electrical connector of the Mass Air Flow Sensor. Before beginning remove the air inlet duct followed by extracting the Mass Air Flow Sensor from its position in the air filter housing. Insert the Mass Air Flow Sensor into the air filter housing before reinstalling the air inlet duct along with reconnecting the Mass Air Flow Sensor electrical connector. Drain the engine while conducting a leak check on the air intake duct during engine start and idle procedure.

OEM 2006 Buick Terraza Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2006 Buick Terraza Mass Air Flow Sensor
Part Number: 19351887
$53.67 MSRP: $167.46
You Save: $113.79 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Mass Airflow; Air Mass Sensor
- Replaces: 10349461, 15911983, 19330124
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.3 x 5.5 x 6.4 inches
- Condition: New
- SKU: 19351887
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Buick Terraza Mass Air Flow Sensor

With a comprehensive array of OEM 2006 Buick Terraza Mass Air Flow Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Terraza Mass Air Flow Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Terraza Mass Air Flow Sensor Parts Questions & Experts Answers

Q: How to replace the Mass Air Flow Sensor on 2006 Buick Terraza?
A: The procedure for replacing the Mass Air Flow Sensor (MAF sensor) begins when you switch off ignition power then remove the electrical connector of the Mass Air Flow Sensor. Before beginning remove the air inlet duct followed by extracting the Mass Air Flow Sensor from its position in the air filter housing. Insert the Mass Air Flow Sensor into the air filter housing before reinstalling the air inlet duct along with reconnecting the Mass Air Flow Sensor electrical connector. Drain the engine while conducting a leak check on the air intake duct during engine start and idle procedure.