How to replace the Clutch Slave Cylinder on 2006 Chevrolet Cobalt?

Begin replacing the clutch actuator cylinder by disconnecting the clutch actuator cylinder line followed by transmission removal. Start by removing clutch actuator cylinder bolts from the transmission before taking out both the upper bolt and clutch actuator cylinder. The inside diameter of the bearing requires saturn p/n 21005995 or an equivalent lubricant before installing the clutch actuator cylinder into the transmission. Use a torque wrench to tighten all clutch actuator cylinder bolts to 10 nm (89 inch lbs.) then torque the upper line release bolt to 10 nm (89 inch lbs.). Connect the clutch actuator cylinder line before reinstalling the transmission and doing hydraulic system bleeding. Do not apply too much lubricant to input shaft splines because it may pollute the Clutch Disc leading to clutch shudder.

OEM 2006 Chevrolet Cobalt Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Slave Cylinders found

View related parts
2006 Chevrolet Cobalt Slave Cylinder
Part Number: 12582666
$116.48 MSRP: $183.26
You Save: $66.78 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Clutch Hydraulic Release Slave/Actuator; Clutch Slave Cylinder
- Item Weight: 1.10 Pounds
- Item Dimensions: 11.7 x 5.1 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12582666
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Slave Cylinder
Part Number: 12583857
$113.57 MSRP: $178.72
You Save: $65.15 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Clutch Hydraulic Release Slave/Actuator; Clutch Slave Cylinder; Actuator
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.6 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12583857
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2006 Chevrolet Cobalt Clutch Slave Cylinder

With a comprehensive array of OEM 2006 Chevrolet Cobalt Clutch Slave Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Clutch Slave Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Clutch Slave Cylinder Parts Questions & Experts Answers

Q: How to replace the Clutch Slave Cylinder on 2006 Chevrolet Cobalt?
A: Begin replacing the clutch actuator cylinder by disconnecting the clutch actuator cylinder line followed by transmission removal. Start by removing clutch actuator cylinder bolts from the transmission before taking out both the upper bolt and clutch actuator cylinder. The inside diameter of the bearing requires saturn p/n 21005995 or an equivalent lubricant before installing the clutch actuator cylinder into the transmission. Use a torque wrench to tighten all clutch actuator cylinder bolts to 10 nm (89 inch lbs.) then torque the upper line release bolt to 10 nm (89 inch lbs.). Connect the clutch actuator cylinder line before reinstalling the transmission and doing hydraulic system bleeding. Do not apply too much lubricant to input shaft splines because it may pollute the Clutch Disc leading to clutch shudder.