How to replace the engine oil pressure switch on 2006 Chevrolet Cobalt?

The first procedure requires lifting and securing the vehicle for the replacement of the engine oil pressure sensor. Before removing the engine oil pressure sensor disconnect its engine harness electrical connector. Tighten the new engine oil pressure sensor until it reaches 22 Nm (16 ft. lbs.) torque specification before attaching the engine harness electrical connector to the sensor and lowering the vehicle.

OEM 2006 Chevrolet Cobalt Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2006 Chevrolet Cobalt Pressure Switch, Green Line
Part Number: 12635992
$18.23 MSRP: $28.56
You Save: $10.33 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Oil Pressure/Temperature; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit
- Replaced by: 19436255
- Replaces: 12610185, 24577642
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2006 Chevrolet Cobalt Oil Pressure Switch

With a comprehensive array of OEM 2006 Chevrolet Cobalt Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Oil Pressure Switch Parts Questions & Experts Answers

Q: How to replace the engine oil pressure switch on 2006 Chevrolet Cobalt?
A: The first procedure requires lifting and securing the vehicle for the replacement of the engine oil pressure sensor. Before removing the engine oil pressure sensor disconnect its engine harness electrical connector. Tighten the new engine oil pressure sensor until it reaches 22 Nm (16 ft. lbs.) torque specification before attaching the engine harness electrical connector to the sensor and lowering the vehicle.