How to replace the rear cup holder in the front floor console on 2006 Chevrolet Malibu?

A user needs to take the console armrest off and open the rear Cup Holder before changing the holder in the front floor console. Begin by unscrewing the console rear Cup Holder screws followed by gently pulling down the Cup Holder bottom until it unfastens from the hooks at its top. Proceed by taking out the console rear Cup Holder. The Cup Holder needs to attach to the floor console hooks at the top before installation while following the fastener notice in service precautions for safe installation. You should install the console rear Cup Holder screws at 1 n.m (10 lb in) tension before placing back the console armrest.

OEM 2006 Chevrolet Malibu Cup Holder

Drink Holder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Cup Holders found

View related parts
2006 Chevrolet Malibu Liner
Part Number: 15813091
Product Specifications
- Other Name: Liner, Instrument Panel
- Position: Front and Rear
- Replaces: 22666124
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 5.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15813091
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Cup Holder
Part Number: 15813090
Product Specifications
- Other Name: Liner, Instrument Panel
- Position: Front
- Replaces: 22666123
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.1 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15813090
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Malibu Cup Holder
Part Number: 22612643
Product Specifications
- Other Name: Housing, Floor Console Compartment Door; Liner; Insert; Liner, Floor Console
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.5 x 3.6 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22612643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2006 Chevrolet Malibu Cup Holder

With a comprehensive array of OEM 2006 Chevrolet Malibu Cup Holder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Malibu Cup Holder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Malibu Cup Holder Parts Questions & Experts Answers

Q: How to replace the rear cup holder in the front floor console on 2006 Chevrolet Malibu?
A: A user needs to take the console armrest off and open the rear Cup Holder before changing the holder in the front floor console. Begin by unscrewing the console rear Cup Holder screws followed by gently pulling down the Cup Holder bottom until it unfastens from the hooks at its top. Proceed by taking out the console rear Cup Holder. The Cup Holder needs to attach to the floor console hooks at the top before installation while following the fastener notice in service precautions for safe installation. You should install the console rear Cup Holder screws at 1 n.m (10 lb in) tension before placing back the console armrest.