How to replace the front outside door handle on 2006 Chevrolet Monte Carlo?

The first step for front outside door handle replacement on a Monte Carlo requires you to secure the window fully up while using two layers of masking tape for painted areas. Start the front door replacement by pulling down the rear window channel then removing the front door water deflector as well as the front door trim panel and rear window channel bolt. Move to the next step by uncontenancing the outside door handle rod-to-lock clip from the door lock cylinder then pulling out the lock cylinder itself. You can reach one of the two bolts which secure the outer door handle through hole plug removal before you can extract the handle together with the rod. Fasten the door handle rod with its lock cylinder retainer clip and join both components together. Fasten the door handle with two bolts that should be tightened to 10 N.m (89 lb in). The lock cylinder needs installation with a new outside handle rod-to-lock clip after checking that the rod alignment removes all free play. The threaded rod must receive the clip cover afterward before returning the rear window channel by ensuring the up clip clicks into place and tightening its bolt to 10 N.m (89 lb in). Place the access hole plug beside the water deflector and trim panel for reinstallation.

OEM 2006 Chevrolet Monte Carlo Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Door Handles found

View related parts
2006 Chevrolet Monte Carlo Handle, Outside, Blue, Driver Side
Part Number: 10435891
$42.33 MSRP: $81.45
You Save: $39.12 (49%)
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Driver Side
- Replaces: 10436864, 10436866
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 5.2 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10435891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Handle, Inside, Driver Side
Part Number: 15810006
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside *Ebony; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.2 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15810006
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Handle, Inside, Front Passenger Side
Part Number: 15810005
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside *Ebony; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.5 x 3.1 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15810005
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Handle, Outside, Passenger Side
Part Number: 10333069
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.1 x 3.1 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10333069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2006 Chevrolet Monte Carlo Door Handle

With a comprehensive array of OEM 2006 Chevrolet Monte Carlo Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Monte Carlo Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the front outside door handle on 2006 Chevrolet Monte Carlo?
A: The first step for front outside door handle replacement on a Monte Carlo requires you to secure the window fully up while using two layers of masking tape for painted areas. Start the front door replacement by pulling down the rear window channel then removing the front door water deflector as well as the front door trim panel and rear window channel bolt. Move to the next step by uncontenancing the outside door handle rod-to-lock clip from the door lock cylinder then pulling out the lock cylinder itself. You can reach one of the two bolts which secure the outer door handle through hole plug removal before you can extract the handle together with the rod. Fasten the door handle rod with its lock cylinder retainer clip and join both components together. Fasten the door handle with two bolts that should be tightened to 10 N.m (89 lb in). The lock cylinder needs installation with a new outside handle rod-to-lock clip after checking that the rod alignment removes all free play. The threaded rod must receive the clip cover afterward before returning the rear window channel by ensuring the up clip clicks into place and tightening its bolt to 10 N.m (89 lb in). Place the access hole plug beside the water deflector and trim panel for reinstallation.