How to replace the right instrument panel fuse box on 2006 Chevrolet Suburban 1500?

Remove the right side end panel first in order to replace the right Instrument Panel Electrical Center or Junction Block. Press on the tabs to take out the fuse block, then pull it from the I/P to get to and loosen the retaining bolt. Take a screwdriver and loosen the wire harness block from the fuse block, then take the I/P wiring harness block out of the car. Hook the fuse block onto the I/P wiring harness block and fasten it in place with the retaining bolt, making sure it is tightened to 6 N.m (53 lb in). Then, put the fuse block into the I/P and make sure it snaps into position, link up the wiring harness to the block, and then install the end panel on the right side.

OEM 2006 Chevrolet Suburban 1500 Fuse Box

Fuse Holder Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuse Box found

View related parts
2006 Chevrolet Suburban 1500 Fuse Box Part Number: 15266954
Product Specifications
- Other Name: Block Assembly-Fuse; Junction Boxes; Junction Block; Block, Wiring Junction
- Replaces: 10383306, 15058033
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.9 x 6.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15266954
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2006 Chevrolet Suburban 1500 Fuse Box

With a comprehensive array of OEM 2006 Chevrolet Suburban 1500 Fuse Box, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Suburban 1500 Fuse Box are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Suburban 1500 Fuse Box Parts and Q&A

Q: How to replace the right instrument panel fuse box on 2006 Chevrolet Suburban 1500?
A: Remove the right side end panel first in order to replace the right Instrument Panel Electrical Center or Junction Block. Press on the tabs to take out the fuse block, then pull it from the I/P to get to and loosen the retaining bolt. Take a screwdriver and loosen the wire harness block from the fuse block, then take the I/P wiring harness block out of the car. Hook the fuse block onto the I/P wiring harness block and fasten it in place with the retaining bolt, making sure it is tightened to 6 N.m (53 lb in). Then, put the fuse block into the I/P and make sure it snaps into position, link up the wiring harness to the block, and then install the end panel on the right side.