OEM 2007 Chevrolet Corvette Throttle Body

2007 Chevrolet Corvette Throttle Body Parts Questions & Experts Answers

• Q: How to replace the throttle body assembly while handling the electronic throttle control components with care on 2007 Chevrolet Corvette?

  A: To remove replacing the Throttle Body assembly, hold the electronic throttle control carefully, so as not to break them or drop them, and do not dip them into cleaning solvents. First, pay attention to the 8-digit part identification number stamped on the Throttle Body casting for reference in the future. Seal any accesses when servicing to prevent contamination. Start by dismantling the air cleaner assembly and disconnect the air control valve electrical connector. Next, unhook 4 Throttle Body bolts and unbolt the Throttle Body and the gasket from the Throttle Body while not reusing the gasket but discarding it. For installation, install a new Throttle Body Gasket first, then install Throttle Body assembly. Ensure that you use a torque wrench instead to tighten the 4 Throttle Body bolts further to 10 n.m (89 lb in) while making sure the air control valve electrical connector and its seals are installed with no sign of harm on it. Last, reattach the air control valve electrical connector and the air cleaner assembly.