OEM 2008 Chevrolet Equinox Alternator

2008 Chevrolet Equinox Parts Questions & Experts Answers

• Q: How to replace the alternator (LNJ) on 2008 Chevrolet Equinox?

  A: Begin generator replacement by disconnecting the negative Battery Cable along with the Drive Belt removal. The generator requires two steps during replacement: detaching the engine wiring harness electrical connector from the generator and repositioning the engine wiring harness boot before removing the generator terminal nut. Start by removing the generator bolts then take off its terminal lead from the engine wiring harness before completely removing the generator. Before generator installation follow the fastener notice then install the generator according to procedure. Fasten the generator bolts with a torque of 50 n.m (37 lb ft). You should install the generator terminal nut after connecting the engine wiring harness terminal lead to the generator then tighten it to 20 n.m (15 lb ft). The installation process takes place by placing the engine wiring harness boot in position while joining the engine wiring harness electrical connector to the generator. Next, install the Drive Belt and end with reattaching the negative Battery Cable.