How to replace the Air Bag Sensor in the Front End on 2008 Chevrolet Express 2500?

Firstly, disable the SIR to replace the Inflatable Restraint Front End Sensor. Next, lift and prop the vehicle. Unplug the CPA from inflatable restraint front end discriminating sensor electrical connector and disconnect the electrical connector. Keep in mind that the fastener has a left handed thread, therefore loosen the inflatable restraint front end sensor mounting nut and slide the sensor towards the front of the vehicle to remove it from the keyhole slot in the lower radiator support. For installation clean the mounting surface and make sure the arrow on the sensor faces the front of vehicle. Mount the inflatable restraint front end sensor, into the lower radiator support 'keyhole slot', press it toward the rear (sit properly) and set the nut to 10 N.m (89 lb in). Reconnect the inflatable restraint front end sensor electrical connector, snap in the CPA, take off the safety stands down, lower the vehicle, and lastly its enable the SIR system.

OEM 2008 Chevrolet Express 2500 Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Air Bag Sensors found

View related parts
2008 Chevrolet Express 2500 Front Impact Sensor
Part Number: 85598016
$178.72 MSRP: $262.49
You Save: $83.77 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Airbag Front End Discriminating; Sensor, Inflatable Restraint System
- Position: Front
- Replaced by: 85668898
- Replaces: 15227467, 20919987
- Condition: New
- SKU: 85598016
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2008 Chevrolet Express 2500 Front Sensor, Passenger Side
Part Number: 13502578
$174.83 MSRP: $254.53
You Save: $79.70 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Side Impact Sensor; Side Sensor
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13502578
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2008 Chevrolet Express 2500 Side Impact Sensor
Part Number: 20919985
$146.43 MSRP: $211.34
You Save: $64.91 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor
- Replaces: 15281885
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.4 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20919985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 2500 Side Impact Sensor, Passenger Side
Part Number: 85598017
$166.54 MSRP: $248.98
You Save: $82.44 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Airbag Side Impact; Sensor, Inflatable Restraint System
- Position: Passenger Side
- Replaced by: 85668899
- Replaces: 20919984, 15227469
- Condition: New
- SKU: 85598017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 2500 Side Impact Sensor
Part Number: 20919986
$11.61 MSRP: $17.29
You Save: $5.68 (33%)
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor
- Replaces: 15281886
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20919986
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 2500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2008 Chevrolet Express 2500 Air Bag Sensor

With a comprehensive array of OEM 2008 Chevrolet Express 2500 Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Express 2500 Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Express 2500 Parts Questions & Experts Answers

Q: How to replace the Air Bag Sensor in the Front End on 2008 Chevrolet Express 2500?
A: Firstly, disable the SIR to replace the Inflatable Restraint Front End Sensor. Next, lift and prop the vehicle. Unplug the CPA from inflatable restraint front end discriminating sensor electrical connector and disconnect the electrical connector. Keep in mind that the fastener has a left handed thread, therefore loosen the inflatable restraint front end sensor mounting nut and slide the sensor towards the front of the vehicle to remove it from the keyhole slot in the lower radiator support. For installation clean the mounting surface and make sure the arrow on the sensor faces the front of vehicle. Mount the inflatable restraint front end sensor, into the lower radiator support 'keyhole slot', press it toward the rear (sit properly) and set the nut to 10 N.m (89 lb in). Reconnect the inflatable restraint front end sensor electrical connector, snap in the CPA, take off the safety stands down, lower the vehicle, and lastly its enable the SIR system.