OEM 2008 Chevrolet HHR Alternator

2008 Chevrolet HHR Parts Questions & Experts Answers

• Q: How to replace the alternator in the L61 and LE5 engines on 2008 Chevrolet HHR?

  A: Vehicle owners should start their generator replacement by disconnecting the negative Battery Cable. Take out the air cleaner assembly which is exclusive to the 2.2l (L61) or 2.4l motor vehicle. Start by taking off the Drive Belt that belongs to the specific engine type. Start by lowering the vehicle then unscrew both the generator terminal nut and engine harness terminal from the generator. Begin by removing the generator's upper bolts before using hoisting equipment to lift and sustain the vehicle. Begin generator replacement by cutting tie strap fasteners and rearranging coolant heating wires if used then extract the generator lower bolt followed by generator electrical connector disconnection to remove the generator unit. The installation process begins by setting the generator correctly in position where you can connect the electrical connector. First align the lower bolt for a secure fit before installing the heat cord for the coolant and securing it with fresh strap attachments if there is a cord. Start with lowering the vehicle. Install upper bolts first before tightening the generator bolts to 22 n.m (16 lb ft). Secure the engine harness terminal by tightening it to 20 n.m (15 lb ft) and the generator terminal nut. The Drive Belt installation should follow engine type specifications before completing the air cleaner assembly reinstall. Reconnect the negative Battery Cable as the last step.