ChevyParts
My Garage
My Account
Cart
OEM 2008 GMC Yukon Flywheel
Clutch Flywheel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Flywheels found
2008 GMC Yukon Drive Plate Part Number: 12654640
$132.99 MSRP: $226.41You Save: $93.42 (42%)Product Specifications- Other Name: Plate, Engine Crankshaft; Flywheel
- Replaces: 12553054, 12602448, 12606620, 12637677, 12563136, 12580709
- Item Weight: 7.70 Pounds
- Item Dimensions: 15.6 x 15.9 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12654640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 GMC Yukon Drive Plate Part Number: 12597524
Product Specifications- Other Name: Plate, Engine Crankshaft
- Item Weight: 6.00 Pounds
- Item Dimensions: 17.1 x 16.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12597524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 GMC Yukon Flywheel
With a comprehensive array of OEM 2008 GMC Yukon Flywheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Yukon Flywheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 GMC Yukon Flywheel Parts and Q&A
- Q: How to replace the Flywheel in an automatic transmission on 2008 GMC Yukon?A: Begin the automatic transmission flex plate replacement by removing the transmission while recording the engine Flywheel position and direction before extracting it. Begin by removing both the Flywheel bolts before taking out the Flywheel itself. Two m11x1.5 mm bolts should be installed into threaded holes of the spacer before you rotate them clockwise to extract the spacer from the Crankshaft end. To install the spacer you should fit it on the Crankshaft rear section while utilizing extended Flywheel bolts if the spacer exists. Install the Crankshaft-mounted Flywheel along with its bolts while applying threadlocking substance according to the correct part specifications. The technician should carry out three separate pass sequences to tighten Flywheel bolts: starting with 20 n.m (15 lb ft), then moving to 50 n.m (37 lb ft), and finally reaching 100 n.m (74 lb ft). Finally, reinstall the automatic transmission.
Related 2008 GMC Yukon Parts
2008 GMC Yukon Shift Cable
2008 GMC Yukon Transfer Case
2008 GMC Yukon Automatic Transmission Filter
2008 GMC Yukon Automatic Transmission Seal
2008 GMC Yukon Automatic Transmission Shifter
2008 GMC Yukon Transfer Case Seal
2008 GMC Yukon Transmission Assembly
2008 GMC Yukon Transmission Gasket
2008 GMC Yukon Transmission Pan