How to change the A/C Switch in the heater and air conditioning control system on 2009 Chevrolet Colorado?

Removing the screws screwing the accessory trim plate and the screws in the HVAC control assembly will be required to replace the heater and air conditioning control. Loose the assembly, de-cable and dis-connect, and remove the assembly. To install, re-install all and reassemble to the instrument panel and then re-install the trim plate.

OEM 2009 Chevrolet Colorado A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Switch found

View related parts
2009 Chevrolet Colorado Temperature Control Part Number: 25841856
Product Specifications
- Other Name: Control, Air Conditioner Instrument Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Replaces: 15132087, 15238515, 15221922, 15113185, 15858833
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.2 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25841856
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Colorado A/C Switch

With a comprehensive array of OEM 2009 Chevrolet Colorado A/C Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado A/C Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Colorado A/C Switch Parts and Q&A

Q: How to change the A/C Switch in the heater and air conditioning control system on 2009 Chevrolet Colorado?
A: Removing the screws screwing the accessory trim plate and the screws in the HVAC control assembly will be required to replace the heater and air conditioning control. Loose the assembly, de-cable and dis-connect, and remove the assembly. To install, re-install all and reassemble to the instrument panel and then re-install the trim plate.