How to replace the brake caliper bracket on 2009 Chevrolet Colorado?

To replace the Brake Caliper Bracket, lift and support the vehicle, pull off the tire and wheel assembly. Support the brake caliper of the vehicle with heavy mechanic wire or an equivalent if it is separated from its mount with the hose of flexible brake fluid still connected to prevent damage on the hose and brake fluid leaks. Do not disconnect the front brake hose, and take off the brake caliper and support it just mentioned. Next, undo the 2 Brake Caliper Bracket bolts and allow the Brake Caliper Bracket to come off by detaching it. Check for broken disc brake hardware and replace it where needed. For installation: reattach the Brake Caliper Bracket to its place, then install the 2 Brake Caliper Bracket bolts tightening them to 180 nm (133 lb ft). Finally, install the brake caliper.

OEM 2009 Chevrolet Colorado Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Caliper Brackets found

View related parts
2009 Chevrolet Colorado Caliper Support, Front Driver Side Part Number: 25832166
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Item Weight: 4.50 Pounds
- Item Dimensions: 11.5 x 4.9 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25832166
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Colorado Caliper Support, Front Passenger Side Part Number: 25832171
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Item Weight: 20.50 Pounds
- Item Dimensions: 10.9 x 7.5 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25832171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Colorado Brake Caliper Bracket

With a comprehensive array of OEM 2009 Chevrolet Colorado Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Colorado Brake Caliper Bracket Parts and Q&A

Q: How to replace the brake caliper bracket on 2009 Chevrolet Colorado?
A: To replace the Brake Caliper Bracket, lift and support the vehicle, pull off the tire and wheel assembly. Support the brake caliper of the vehicle with heavy mechanic wire or an equivalent if it is separated from its mount with the hose of flexible brake fluid still connected to prevent damage on the hose and brake fluid leaks. Do not disconnect the front brake hose, and take off the brake caliper and support it just mentioned. Next, undo the 2 Brake Caliper Bracket bolts and allow the Brake Caliper Bracket to come off by detaching it. Check for broken disc brake hardware and replace it where needed. For installation: reattach the Brake Caliper Bracket to its place, then install the 2 Brake Caliper Bracket bolts tightening them to 180 nm (133 lb ft). Finally, install the brake caliper.