OEM 2009 Chevrolet Malibu Washer Reservoir

2009 Chevrolet Malibu Washer Reservoir Parts Questions & Experts Answers

• Q: How to replace the windshield washer reservoir on 2009 Chevrolet Malibu?

  A: To replace the Washer Reservoir start by opening the hood and disconnecting the inlet hose. Before proceeding disconnect Washer Pump hose from windshield washer hose and then separate the hose from the Washer Reservoir. Transfer washer solvent into a clean storage tank before disconnecting both electrical components from the washer level indicator and Washer Pump. Take off the Washer Reservoir nuts and extract the Washer Reservoir from its left frame rail location. Migrate both the Washer Pump and level indicator units including their seals from the used to the brand-new Washer Reservoir. Arrange the new Washer Reservoir between left frame rail studs and secure it by tightening Washer Reservoir nuts to 10 nm (89 lb in). Plug in both the Washer Pump electrical connector and the washer level indicator electrical connector before connecting the Washer Pump hose to its outlet and firmly attaching it to the Washer Reservoir body. Reposition and tighten the front wheelhouse panel shield before moving the vehicle into position to insert the Washer Reservoir supply line. Add proper washer solvent to the reservoir while testing the wipers and locking the hood into place.