OEM 2009 Chevrolet Silverado 1500 Washer Reservoir

2009 Chevrolet Silverado 1500 Parts Questions & Experts Answers

• Q: How to replace the windshield washer reservoir on 2009 Chevrolet Silverado 1500?

  A: Start by lifting and holding the vehicle. For this task take off the left front wheel and wheelhouse liner. Before lowering the vehicle take out the lower impossible bolt from the washer container first. Remove the Washer Pump hoses 1 and 2 from their connection on the left fender flange and disconnect the electrical parts. Lower your vehicle to open the Hood Latch and then you can reach the hood washer solvent container. Rearrange the device that supports the secondary battery when it exists within the vehicle. Unplug the washer assembly by entering through the wheelhouse opening to reach the washer container underneath before taking off both upper windshield washer bolts and installing the washer solvent container assembly. Pump the windshield washer solvent into a suitable empty receptacle. Rephrase the following sentence. Normalizing verbalization when possible. Install washer pumps and the level indicator onto the new washer solvent container before placing the windshield washer container as a single unit. Fasten the two windshield washer solvent container upper bolts to 9 nm of torque before placing the auxiliary battery tray back if original equipment existed. Join electrical links and Washer Pump tubing parts (1 and 2). Install the washer container bolt from below and put back the left wheelhouse panel and front wheel. Add windshield solvent to the washer solvent container and put on its cap for sealing.