Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Chevrolet Tahoe Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

  • 2009 Chevy Tahoe Crankshaft Seal - 89060436
    2009 Chevy Tahoe Crankshaft Seal - 89060436
    2009 Chevy Tahoe Crankshaft Seal - 89060436
    2009 Chevy Tahoe Crankshaft Seal Diagram - 89060436
    View related parts

    2009 Chevrolet Tahoe Rear Main Seal Part Number: 89060436

    $24.24 MSRP: $39.93
    You Save: $15.69 (40%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
    • Position: Rear
    • Replaces: 12550574, 12585671, 89018162
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 5.1 x 5.3 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 89060436
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Chevrolet Tahoe Submodels:
    • Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 Chevrolet Tahoe Crankshaft Seal

With a comprehensive array of OEM 2009 Chevrolet Tahoe Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Tahoe Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Tahoe Crankshaft Seal Parts and Q&A

  • Q: How to replace the front crankshaft seal on 2009 Chevrolet Tahoe?
    A: The first step to replace the crankshaft front oil seal is to remove the crankshaft balancer. You need to extract the crankshaft front oil seal (140) from the front cover. The correct procedure requires non-oil lubrication on the oil seal sealing surface and complete avoidance of front crankshaft oil seal reuse during installation. Clean engine oil must be applied at the outer edge of the oil seal (140) and the front cover oil seal bore before starting the installation process. Place the crankshaft front oil seal (140) onto the dedicated J 41478 (Crankshaft Front Oil Seal Installer). The first step entails positioning the J 41478 threaded rod with its attached nut, washer, guide, and oil seal into the crankshaft end while using the J 41478 for correct installation of the oil seal into the cover bore. Use a second wrench to rotate the installer nut clockwise until the seal rests completely within the cover bore while holding the hex of the installer bolt with a wrench. Always check the oil seal installation in the front cover bore after removing the J 41478 by inspecting it for proper and uniform distribution of the seal inside the bore. Finally, reinstall the crankshaft balancer.

Related 2009 Chevrolet Tahoe Parts

Alternate Year Models

+
2008 Chevrolet Tahoe Crankshaft Seal 2010 Chevrolet Tahoe Crankshaft Seal