How to replace the rear bumper fascia on 2009 Chevrolet Trailblazer?

Before fitting a new rear bumper fascia it is essential to detach the back up lamp socket assemblies from their housing as needed. Begin with both lower fascia push-pins until you reach the screws from the rear wheelhouse flanges before removing the upper retaining bolts from behind the fascia. Proceed to take off the fascia from the vehicle after removing all components. Install the fascia onto the vehicle impact bar according to fastener caution guidelines. Secure the upper retaining bolts on the fascia before tightening them to 2.5 Nm (22 lb in). Tighten the screws which fasten the fascia to wheelhouse flanges up to 4.5 Nm torque setting (40 lb in measurement). Complete the seating mechanism of lower push-pins before you reinsert back up lamp sockets when needed.

OEM 2009 Chevrolet Trailblazer Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2009 Chevrolet Trailblazer Bumper Cover Part Number: 88937008
$200.98 MSRP: $300.48
You Save: $99.50 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Item Weight: 9.90 Pounds
- Item Dimensions: 81.2 x 22.4 x 19.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88937008
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Trailblazer Bumper Cover Part Number: 19120217
$626.85 MSRP: $941.40
You Save: $314.55 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Upper
- Item Weight: 9.10 Pounds
- Item Dimensions: 78.3 x 32.3 x 20.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19120217
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- SS | 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Bumper Cover Part Number: 19120212
$341.85 MSRP: $511.09
You Save: $169.24 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Item Weight: 23.80 Pounds
- Item Dimensions: 82.4 x 31.3 x 19.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19120212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- LT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Trailblazer Bumper Cover Part Number: 19120983
$328.59 MSRP: $491.26
You Save: $162.67 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 19120213
- Item Weight: 22.90 Pounds
- Item Dimensions: 82.0 x 23.1 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19120983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Trailblazer Bumper Cover Part Number: 19120215
$551.61 MSRP: $828.42
You Save: $276.81 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Item Weight: 7.70 Pounds
- Item Dimensions: 82.7 x 22.4 x 19.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19120215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- SS | 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Bumper Cover, Rear Lower Part Number: 19120218
$262.81 MSRP: $392.91
You Save: $130.10 (34%)
Product Specifications
- Other Name: Fascia, Rear Bumper Lower; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Lower
- Item Weight: 11.20 Pounds
- Item Dimensions: 59.6 x 11.3 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19120218
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- SS | 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Bumper Cover Part Number: 88943617
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Item Weight: 10.80 Pounds
- Item Dimensions: 82.7 x 22.7 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88943617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Trailblazer Bumper

With a comprehensive array of OEM 2009 Chevrolet Trailblazer Bumper, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Trailblazer Bumper are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Trailblazer Bumper Parts and Q&A

Q: How to replace the rear bumper fascia on 2009 Chevrolet Trailblazer?
A: Before fitting a new rear bumper fascia it is essential to detach the back up lamp socket assemblies from their housing as needed. Begin with both lower fascia push-pins until you reach the screws from the rear wheelhouse flanges before removing the upper retaining bolts from behind the fascia. Proceed to take off the fascia from the vehicle after removing all components. Install the fascia onto the vehicle impact bar according to fastener caution guidelines. Secure the upper retaining bolts on the fascia before tightening them to 2.5 Nm (22 lb in). Tighten the screws which fasten the fascia to wheelhouse flanges up to 4.5 Nm torque setting (40 lb in measurement). Complete the seating mechanism of lower push-pins before you reinsert back up lamp sockets when needed.