How to replace the rear output transfer case seal on 2009 Chevrolet Trailblazer?

The first step for output shaft seal replacement requires vehicle elevation. The second step includes separating the rear propeller shaft from the vehicle system. Finally remove the rear output shaft seal while checking the rear output shaft bushing for damage and wear. The j 45380 (Transfer Case Rear Bushing Remover and Installer) can assist you to extract the rear output shaft bushing through finger section installation followed by tube and forcing screw attachment until the bushing comes out using a wrench. The j 45380 (Transfer Case Rear Bushing Remover and Installer) must be used to properly position the new bushing until the tool stops at the case's bottom and the tool should be removed afterward. Position the notch feature of j 37668-a (Output Shaft Seal Installer) against the tab on the seal before placing the seal with its tab on top and weep hole on the bottom. Install the rear propeller shaft while inspecting the transfer case fluid level then lower the vehicle.

OEM 2009 Chevrolet Trailblazer Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Transfer Case Seals found

View related parts
2009 Chevrolet Trailblazer Extension Seal, Rear
Part Number: 88935685
$75.70 MSRP: $118.56
You Save: $42.86 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transfer Case Rear Output Shaft; Transfer Case Gasket; Seal, Transfer Case
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 3.9 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88935685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2009 Chevrolet Trailblazer Extension Housing Seal, Rear
Part Number: 24232325
$14.36 MSRP: $23.64
You Save: $9.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Automatic Transmission Extension Housing Seal; Transmission Seal; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
- Position: Rear
- Replaces: 24201470
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 3.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24232325
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2009 Chevrolet Trailblazer Transfer Case Seal

With a comprehensive array of OEM 2009 Chevrolet Trailblazer Transfer Case Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Trailblazer Transfer Case Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Trailblazer Parts Questions & Experts Answers

Q: How to replace the rear output transfer case seal on 2009 Chevrolet Trailblazer?
A: The first step for output shaft seal replacement requires vehicle elevation. The second step includes separating the rear propeller shaft from the vehicle system. Finally remove the rear output shaft seal while checking the rear output shaft bushing for damage and wear. The j 45380 (Transfer Case Rear Bushing Remover and Installer) can assist you to extract the rear output shaft bushing through finger section installation followed by tube and forcing screw attachment until the bushing comes out using a wrench. The j 45380 (Transfer Case Rear Bushing Remover and Installer) must be used to properly position the new bushing until the tool stops at the case's bottom and the tool should be removed afterward. Position the notch feature of j 37668-a (Output Shaft Seal Installer) against the tab on the seal before placing the seal with its tab on top and weep hole on the bottom. Install the rear propeller shaft while inspecting the transfer case fluid level then lower the vehicle.