How to replace the Camshaft Position Sensor on Bank 2 (Left Side) Exhaust on 2010 Buick Enclave?

The first step to replace a Camshaft Position Sensor on Bank 2 (Left Side) Exhaust requires removal of the engine mount strut bracket. Start by detaching the engine wiring harness electrical connector from the bank 2 exhaust camshaft position (CMP) sensor and afterward extract the CMP sensor bolt and sensor. During CMP sensor installation you should place the sensor and bolt then fasten it until it reaches 89 lb in (10 Nm). Few more tasks follow this step by plugging the engine wiring harness electrical connector to bank 2 exhaust CMP sensor then reinstalling the engine mount strut bracket.

OEM 2010 Buick Enclave Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2010 Buick Enclave Camshaft Position Sensor
Part Number: 12684186
$17.04 MSRP: $34.60
You Save: $17.56 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12615371
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12684186
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Enclave Submodels:
- Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS

2010 Buick Enclave Camshaft Position Sensor

With a comprehensive array of OEM 2010 Buick Enclave Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Enclave Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Enclave Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on Bank 2 (Left Side) Exhaust on 2010 Buick Enclave?
A: The first step to replace a Camshaft Position Sensor on Bank 2 (Left Side) Exhaust requires removal of the engine mount strut bracket. Start by detaching the engine wiring harness electrical connector from the bank 2 exhaust camshaft position (CMP) sensor and afterward extract the CMP sensor bolt and sensor. During CMP sensor installation you should place the sensor and bolt then fasten it until it reaches 89 lb in (10 Nm). Few more tasks follow this step by plugging the engine wiring harness electrical connector to bank 2 exhaust CMP sensor then reinstalling the engine mount strut bracket.

Related 2010 Buick Enclave Parts

Alternate Year Models

2009 Buick Enclave Camshaft Position Sensor 2011 Buick Enclave Camshaft Position Sensor