How to replace the Front Exhaust Pipe on 2010 Chevrolet Aveo?

Begin replacement of the front pipe by first removing the rear heated Oxygen Sensor and connecting pipe mounting bracket bolt alongside the connecting pipe nuts and gasket from the Catalytic Converter until all the front muffler pipe to connecting pipe nuts have been removed. You must check both the front muffler pipe flange and connecting pipe surfaces for any sign of dirt and examine the connecting pipe for exhaustion fume infiltration possibility through holes or damage or other quality degradation that could allow fumes to enter the passenger area. Installation requires applying 30 nm (22 lb ft) torque when fastening the front muffler pipe flange with the Catalytic Converter to the connecting pipe through the gasket. You must now fasten the connecting pipe to the Catalytic Converter while using nuts and a gasket before tightening it to 40 nm (30 lb ft). First mount the front Exhaust Pipe through the bracket bolt and apply torque at 40 nm (30 lb ft). Afterward install the rear heated Oxygen Sensor and torque it to 41 nm (30 lb ft).

OEM 2010 Chevrolet Aveo Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Pipes found

View related parts
2010 Chevrolet Aveo Front Pipe
Part Number: 96654193
Product Specifications
- Other Name: Pipe, Exhaust Front; Exhaust Pipe; Pipe, Exhaust Pipe
- Position: Front
- Item Weight: 2.70 Pounds
- Item Dimensions: 40.2 x 14.0 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96654193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Muffler
Part Number: 96654227
Product Specifications
- Other Name: Muffler, Exhaust Muffler/Resonator; Direct-Fit Exhaust; Exhaust System Kit; Muffler, Exhaust
- Position: Rear
- Item Weight: 16.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96654227
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Resonator & Pipe
Part Number: 96654214
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Resonator; Muffler
- Item Weight: 12.90 Pounds
- Item Dimensions: 56.1 x 20.9 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96654214
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Front Pipe
Part Number: 96654192
Product Specifications
- Other Name: Pipe, Exhaust Front; Exhaust Pipe; Pipe, Exhaust Pipe
- Position: Front
- Item Weight: 7.60 Pounds
- Item Dimensions: 36.3 x 8.0 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96654192
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Exhaust Pipe

With a comprehensive array of OEM 2010 Chevrolet Aveo Exhaust Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Exhaust Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Exhaust Pipe Parts Questions & Experts Answers

Q: How to replace the Front Exhaust Pipe on 2010 Chevrolet Aveo?
A: Begin replacement of the front pipe by first removing the rear heated Oxygen Sensor and connecting pipe mounting bracket bolt alongside the connecting pipe nuts and gasket from the Catalytic Converter until all the front muffler pipe to connecting pipe nuts have been removed. You must check both the front muffler pipe flange and connecting pipe surfaces for any sign of dirt and examine the connecting pipe for exhaustion fume infiltration possibility through holes or damage or other quality degradation that could allow fumes to enter the passenger area. Installation requires applying 30 nm (22 lb ft) torque when fastening the front muffler pipe flange with the Catalytic Converter to the connecting pipe through the gasket. You must now fasten the connecting pipe to the Catalytic Converter while using nuts and a gasket before tightening it to 40 nm (30 lb ft). First mount the front Exhaust Pipe through the bracket bolt and apply torque at 40 nm (30 lb ft). Afterward install the rear heated Oxygen Sensor and torque it to 41 nm (30 lb ft).