How to replace the Washer Reservoir and pump on 2010 Chevrolet Aveo?

Remove the negative Battery Cable before you start replacing the windshield washer solvent container and pump. Take off the front left wheel and then get rid of the bolts that keep the front wheel well splash shield in place. Unhook the hoses from the reservoir and take off the plugs from the reservoir pump's electrical wires. Unscrew the bolts and nuts so you can take out the reservoir. Put the reservoir in place and tighten the nuts and bolts to 9 nm (80 lb in). Connect both the reservoir pump wires and the washer hoses again. Attach the front wheel well splash shield with the bolts and tighten to 1.5 nm (13 lb in), and then put the front left wheel back in place. Lastly, put the negative Battery Cable back on the battery.

OEM 2010 Chevrolet Aveo Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2010 Chevrolet Aveo Filler Tube
Part Number: 95991491
$49.01 MSRP: $87.52
You Save: $38.51 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Container, Windshield Washer; Reservoir Assembly
- Replaces: 96843233
- Item Weight: 1.30 Pounds
- Item Dimensions: 12.7 x 10.1 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95991491
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Washer Reservoir

With a comprehensive array of OEM 2010 Chevrolet Aveo Washer Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Washer Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Washer Reservoir and pump on 2010 Chevrolet Aveo?
A: Remove the negative Battery Cable before you start replacing the windshield washer solvent container and pump. Take off the front left wheel and then get rid of the bolts that keep the front wheel well splash shield in place. Unhook the hoses from the reservoir and take off the plugs from the reservoir pump's electrical wires. Unscrew the bolts and nuts so you can take out the reservoir. Put the reservoir in place and tighten the nuts and bolts to 9 nm (80 lb in). Connect both the reservoir pump wires and the washer hoses again. Attach the front wheel well splash shield with the bolts and tighten to 1.5 nm (13 lb in), and then put the front left wheel back in place. Lastly, put the negative Battery Cable back on the battery.