How to Properly Service and Replace the Secondary Air Injection Pump on 2010 Chevrolet Colorado?

Open the hood and disconnect the inlet and outlet hoses from the secondary air injection pump. Launch the car's engine, remove the engine shield and disconnect the wiring harness. Remove the pump nuts on the AIR pump, lower the vehicle and remove the pump. Install the new pump and tighten the nuts then reconnect the wiring and hoses then close the hood.

OEM 2010 Chevrolet Colorado Secondary Air Injection Pump

Secondary Smog Air Injection Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Secondary Air Injection Pump found

View related parts
2010 Chevrolet Colorado A.I.R. Pump Part Number: 15928252
$179.89 MSRP: $322.68
You Save: $142.79 (45%)
Product Specifications
- Other Name: Pump, Air Injection Reactor Pump And Multi-Function Air Compressor; Secondary Air Injection Pump; Pump, Air Injection Reactor Pump And Multi - Function Air Compressor
- Replaces: 15103159
- Item Weight: 5.40 Pounds
- Item Dimensions: 12.2 x 8.4 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15928252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Colorado Secondary Air Injection Pump

With a comprehensive array of OEM 2010 Chevrolet Colorado Secondary Air Injection Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Colorado Secondary Air Injection Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Colorado Secondary Air Injection Pump Parts and Q&A

Q: How to Properly Service and Replace the Secondary Air Injection Pump on 2010 Chevrolet Colorado?
A: Open the hood and disconnect the inlet and outlet hoses from the secondary air injection pump. Launch the car's engine, remove the engine shield and disconnect the wiring harness. Remove the pump nuts on the AIR pump, lower the vehicle and remove the pump. Install the new pump and tighten the nuts then reconnect the wiring and hoses then close the hood.