How to replace the fuel level sensor on 2010 Chevrolet HHR?

The first step to replace the Fuel Level Sensor requires removal of the Fuel Pump module. Forced air ventilation should be applied while personnel plug or cap any fuel system openings and clean up immediately all spilled fuel; both sparking events and warning signs must be present to protect coworkers. Gently stretch both locking tabs outward when using two flat-bladed tools while you raise the level sensor at that moment. A small bladed tool should be used to simultaneously push electrical terminals into position while removing them from the system. Following the installation process should start by pushing both electrical terminals into place before inserting the level sensor correctly. The installation of the Fuel Pump module should follow.

OEM 2010 Chevrolet HHR Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

View related parts
2010 Chevrolet HHR Fuel Gauge Sending Unit
Part Number: 19168519
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: 15293416
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.9 x 6.6 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19168519
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Fuel Level Sensor

With a comprehensive array of OEM 2010 Chevrolet HHR Fuel Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Fuel Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Fuel Level Sensor Parts Questions & Experts Answers

Q: How to replace the fuel level sensor on 2010 Chevrolet HHR?
A: The first step to replace the Fuel Level Sensor requires removal of the Fuel Pump module. Forced air ventilation should be applied while personnel plug or cap any fuel system openings and clean up immediately all spilled fuel; both sparking events and warning signs must be present to protect coworkers. Gently stretch both locking tabs outward when using two flat-bladed tools while you raise the level sensor at that moment. A small bladed tool should be used to simultaneously push electrical terminals into position while removing them from the system. Following the installation process should start by pushing both electrical terminals into place before inserting the level sensor correctly. The installation of the Fuel Pump module should follow.