ChevyParts
My Garage
My Account
Cart
OEM 2010 GMC Savana 2500 Engine Control Module
Engine Control Computer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Engine Control Modules found
2010 GMC Savana 2500 PCM Part Number: 12633238
$245.01 MSRP: $496.56You Save: $251.55 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Item Weight: 3.20 Pounds
- Item Dimensions: 11.3 x 7.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12633238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 GMC Savana 2500 ECM Part Number: 12652526
$1031.92 MSRP: $1834.78You Save: $802.86 (44%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Module Assembly-Engine Control (W/O Calibration); Engine Control Module; Module, Emission Control System
- Replaces: 12618516
- Item Weight: 7.60 Pounds
- Item Dimensions: 5.3 x 14.1 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12652526
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 GMC Savana 2500 ECM Part Number: 19260758
Product Specifications- Other Name: Module Assembly, Engine Control; Engine Control Module; Module, Emission Control System
- Replaces: 12609441
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.5 x 10.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19260758
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 GMC Savana 2500 Engine Control Module
With a comprehensive array of OEM 2010 GMC Savana 2500 Engine Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 2500 Engine Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 GMC Savana 2500 Engine Control Module Parts and Q&A
- Q: How to service the Engine Control Module (ECM) on 2010 GMC Savana 2500?A: Service of the Engine Control Module (ECM) requires a new ecm installation or eeprom programming. Replace only the correct ecm component before you take out the old ecm and put in the new service ecm. Turn the ignition off whenever you work with control module connectors and disconnect power to prevent damage inside the components. The metal case of the control module must stay away from battery voltage at all times while touching either the connector pins or components will lead to electrostatic discharge damage. Check all surfaces around the control module connector for debris before inspecting the connector gaskets for proper installation to block contaminants from entering. Programming is mandatory for the substitute control module. Before separating the negative Battery Cable utilize a scan tool to note down the present engine oil life percentage. First disconnect the electrical connectors from the engine wiring harness on the ecm then free the bracket tabs and remove the ecm from its mount. Check the bracket tabs for full insertion before installing the ecm then proceed to reconnect all engine wiring harness electrical connectors and the negative Battery Cable. A new ecm requires proper programming and its life of engine oil should be programmed using a scan tool.
Related 2010 GMC Savana 2500 Parts
2010 GMC Savana 2500 Automatic Transmission Shift Position Sensor Switch
2010 GMC Savana 2500 Back Up Light Switch
2010 GMC Savana 2500 Camshaft Position Sensor
2010 GMC Savana 2500 Coolant Temperature Sensor
2010 GMC Savana 2500 Ignition Coil
2010 GMC Savana 2500 Ignition Control Module
2010 GMC Savana 2500 Knock Sensor
2010 GMC Savana 2500 Neutral Safety Switch
2010 GMC Savana 2500 Relay
2010 GMC Savana 2500 Spark Plug
2010 GMC Savana 2500 Spark Plug Wires
2010 GMC Savana 2500 Vehicle Speed Sensor