How to Service and Repair the Fuel Pump Strainer on Buick Park Avenue?

Start the Fuel Pump Strainer service and repair with the necessary equipment consisting of the fuel pressure gauge (J 34730). Proper air circulation must be maintained during fuel work to protect workers from possible harm while safety goggles should shield your eyes from fuel droplets that can occur. When working with the fuel sender assembly avoid handling by fuel pipes to protect the joints from damage while also cleaning all fuel pipe connections and hose connections together with the surrounding contacts before disassembly to prevent contamination risks. You should reduce fuel system pressure then empty the Fuel Tank until it reaches 3/4 of the total capacity. Save the proper orientation of the Fuel Pump Strainer and then remove the fuel sender assembly. Use your opposite hand to pull off the external Fuel Pump Strainer from the reservoir while sustaining the reservoir with your other hand. Verify the strainer for contaminants at this time if any are detected discard the strainer. You should separate the electrical connectors from the fuel pump sensor assembly and cover assembly along with the Fuel Level Sensor assembly. Place a new Fuel Pump Strainer on the modular fuel sender with proper seating before reassembling the Fuel Level Sensor assembly as well as electrical connectors. After assembling the fuel sender connect fuel into the system then tightly secure the Fuel Tank filler pipe cap. Review fuel system leaks while turning on and off the ignition according to the specifications by restoring the negative Battery Cable. Proceed with the installation of the fuel sender access panel by using a torque of 2 n.m (18 lb in) on its bolts. After that route the rear compartment trim panel. Then add the spare tire, jack, and spare tire cover before finishing with the fuel injector sight shield.

OEM Buick Park Avenue Fuel Pump Strainer

Fuel Tank Sender Strainer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Pump Strainers found

View related parts
Buick Park Avenue Fuel Strainer Part Number: 25166285
$12.60 MSRP: $21.14
You Save: $8.54 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strainer Package, Fuel; Filter; Strainer; Strainer Kit, Fuel Pump Pressure; Strainer Kit, Fuel Tank Gage; Strainer, Fuel Tank Gage
- Replaces: 25121625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Fuel Strainer Part Number: 25335946
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Fuel Strainer Part Number: 25335945
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Fuel Strainer Part Number: 25330712
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Fuel Strainer Part Number: 25330711
Product Specifications
- Other Name: Strainer Package, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Fuel Strainer Part Number: 25163907
Product Specifications
- Other Name: Strainer Kit, Fuel; Fuel Pump Strainer; Strainer; Strainer Kit, Fuel Tank Gage
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Fuel Pump Strainer

Want to cut long-term maintenance and repair costs? Choose OEM Fuel Pump Strainer. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Fuel Pump Strainer includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Park Avenue Fuel Pump Strainer is a well-known part reputed to be highly facilitative and efficient in performing its assigned responsibilities in the fuel system of many Buick Park Avenue models. This Fuel Pump Strainer thus serves as a safeguard and a cleaner to the fuel, sifting out unwanted particles and grit from the fuel before it is sent to the engine to boost the efficiency and safety of the car. This strainer fits most generations of the Buick Park Avenue, and the fuel pump remains fine, and this enhances the longevity of the engine as well as the general performance of the automobile. This part is undeniably important due to the fact that it protects the Park Avenue fuel pump motor from various contaminants that may cause extensive damages that will cost a lot of money and result to reduced efficiency of the motor. For instance, the Fuel Pump Strainer has been created to be easily installed below the fuel pump with a connection to the fuel pickup tube for the optimal performance. Some of its defining characteristics involve a strong body that is capable of bearing the stress that is inevitable with every trip, and an ergonomic shape that enhances the delivery of fuel to the Buick Park Avenue's fuel system. Based on the company's success on its previous products, the Buick Park Avenue Fuel Pump Strainer demonstrated the effectiveness of Buick as a company engaged in the innovation of quality automobile parts that can help the drivers of their favorite Buick Park Avenue cars to have a smooth and reliable ride.

Buick Park Avenue Fuel Pump Strainer Parts and Q&A

Fuel Strainer
25330712
Q: How to Service and Repair the Fuel Pump Strainer on Buick Park Avenue?
A:
Start the Fuel Pump Strainer service and repair with the necessary equipment consisting of the fuel pressure gauge (J 34730). Proper air circulation must be maintained during fuel work to protect workers from possible harm while safety goggles should shield your eyes from fuel droplets that can occur. When working with the fuel sender assembly avoid handling by fuel pipes to protect the joints from damage while also cleaning all fuel pipe connections and hose connections together with the surrounding contacts before disassembly to prevent contamination risks. You should reduce fuel system pressure then empty the Fuel Tank until it reaches 3/4 of the total capacity. Save the proper orientation of the Fuel Pump Strainer and then remove the fuel sender assembly. Use your opposite hand to pull off the external Fuel Pump Strainer from the reservoir while sustaining the reservoir with your other hand. Verify the strainer for contaminants at this time if any are detected discard the strainer. You should separate the electrical connectors from the fuel pump sensor assembly and cover assembly along with the Fuel Level Sensor assembly. Place a new Fuel Pump Strainer on the modular fuel sender with proper seating before reassembling the Fuel Level Sensor assembly as well as electrical connectors. After assembling the fuel sender connect fuel into the system then tightly secure the Fuel Tank filler pipe cap. Review fuel system leaks while turning on and off the ignition according to the specifications by restoring the negative Battery Cable. Proceed with the installation of the fuel sender access panel by using a torque of 2 n.m (18 lb in) on its bolts. After that route the rear compartment trim panel. Then add the spare tire, jack, and spare tire cover before finishing with the fuel injector sight shield.