Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
Cadillac Escalade ESV Flywheel
Our website offers an extensive catalog of genuine Cadillac Escalade ESV Flywheel at unbeatable prices. Every OEM Cadillac Escalade ESV Flywheel comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade ESV Flywheel Parts Questions & Experts Answers
Q: How to replace the engine flywheel on Cadillac Escalade ESV?
A: You must start by taking off the automatic transmission while marking down the engine Flywheel position together with its direction after removing it. Begin by removing the bolts from the Flywheel and taking out the Flywheel piece afterward. Two m11x1.5 mm bolts must go through the threaded spacer holes before you turn them clockwise for spacer removal from the Crankshaft rear side. Before installation apply the spacer to the Crankshaft end and follow by attaching the Flywheel and its bolts to the Crankshaft using extended Flywheel bolts when a spacer exists behind the Crankshaft. N3m threadlocker gm p/n 12345382 (Canadian P/N 10953489) and equivalent products need application on Flywheel bolt threads. The Flywheel bolt tightening process should begin at 20 nm (15 ft. Lbs.) before proceeding to 50 nm (37 ft. Lbs.) and finally reaching 100 nm (74 ft. Lbs.). Reinsert the automatic transmission after performing the tightening operation.