ChevyParts
My Garage
My Account
Cart
OEM Cadillac Escalade EXT Fuel Filler Hose
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Fuel Filler Hoses found
Cadillac Escalade EXT Upper Hose
Part Number: 15124940$60.07 MSRP: $97.15You Save: $37.08 (39%)Ships in 1-2 Business Days
Cadillac Escalade EXT Filler Neck
Part Number: 15844701$55.11 MSRP: $111.94You Save: $56.83 (51%)Ships in 1-2 Business Days
Cadillac Escalade EXT Fuel Filler Hose
Our website offers an extensive catalog of genuine Cadillac Escalade EXT Fuel Filler Hose at unbeatable prices. Every OEM Cadillac Escalade EXT Fuel Filler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade EXT Fuel Filler Hose Parts Questions & Experts Answers
- Q: How to replace the Fuel Filler Hose in a single tank system on Cadillac Escalade EXT?A: The first step to replace a single tank fuel tube requires cleaning both fuel connections and nearby areas to avoid contamination followed by removal of the fuel fill cap. The next step should begin with the torx(R) screws that secure both the Fuel Tank filler housing to body and its retainer. The procedure begins with the removal of the spare tire stowage lock cylinder together with the spare tire if required. Disconnect the screws which link the Fuel Tank filler housing to the fill pipe. The vehicle requires proper suspension while it is elevated. Use a tool to open the rear axle vent hose clip at the fill pipe while removing the vent tube from the hose. The air suspension hose should be removed from the fill pipe if it is present. First detach the ground wire harness bolt before removing the ground wire and fill pipe ground strap. To conduct the replacement disconnect the vent hose quick connector at the Fuel Tank then remove the fuel fill pipe bracket screws and unclench the fuel fill pipe bracket bolts. Remove the fuel fill pipe hose from the Fuel Tank as a first step before pulling out both tubes while securing the Fuel Tank opening through capping. To perform installation begin by uncapping the Fuel Tank opening then connect the fuel fill pipe hose to the tank followed by installing the fuel fill pipe bracket bolts before you tighten them to 12 n.m (106 lb in). Attach the vent hose quick connect fitting to the tank while tightening the fuel fill pipe hose clamp to 2.5 n.m (22lb in). Secure the fill pipe ground strap and ground wire then put the ground wire harness bolt into place while tightening it to 9 n.m (80 lb in). Install the air suspension hose at the fill pipe before securely attaching the vent hose to its clip. Position the vehicle at the lowest height before installing screws between the Fuel Tank filler housing and fill pipe while tightening them to 2.3 n.m (20 lb in). Complete the installation by fastening the torx(R) screws and retainer of the Fuel Tank filler housing to the body while tightening them to 2.3 n.m (20 lb in). If needed, reinstall the spare tire along with its stowage lock cylinder before placing the fuel fill cap.
Related Cadillac Escalade EXT Parts
Cadillac Escalade EXT Fuel Line Clamps
Cadillac Escalade EXT Fuel Pressure Sensor
Cadillac Escalade EXT Fuel Pump
Cadillac Escalade EXT Fuel Pump Driver Module
Cadillac Escalade EXT Fuel Pump Gasket
Cadillac Escalade EXT Fuel Tank
Cadillac Escalade EXT Fuel Tank Filler Neck
Cadillac Escalade EXT Fuel Tank Lock Ring
Cadillac Escalade EXT Fuel Tank Strap
Cadillac Escalade EXT Gas Cap
Cadillac Escalade EXT Throttle Cable
Cadillac Escalade EXT Turbocharger