Other Name: Hinge Kit, Rear Side Door Lower Hinge; Door Hinge; Lower Hinge; Hinge Strap Anchor Plate; Hinge Kit, Rear Side Door Upper Hinge; Hinge, Rear Side Door Lower Hinge
Position: Rear Lower Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1994 Chevrolet Cavalier | Base, CL, CS, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
Other Name: Hinge Kit, Front Door Lower Hinge; Door Hinge; Hinge Strap Anchor Plate; Hinge, Front Door Lower Hinge
Position: Front Lower Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1994 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
Chevrolet Cavalier Door Hinge
Our website offers an extensive catalog of genuine Chevrolet Cavalier Door Hinge at unbeatable prices. Every OEM Chevrolet Cavalier Door Hinge comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Cavalier Door Hinge Parts Questions & Experts Answers
Q: How to replace the rear door hinge on Chevrolet Cavalier?
A: The hinge replacement of the rear door requires maintaining the door closed and doing the work one hinge at a time starting with the damaged part. Open the front door to gain access to the rear door hinges. Mark each surface mounting point using a grease pencil or marker to a suitable marker before cleaning both areas with a clean rag. The door hinges of the rear door will be removed beginning with the bolts from the doorside hinge and following with bolts (1-5) from the bodyside hinge until the door hinge is extracted from the vehicle. You should position the new rear door hinge correctly by using the alignment marks on the installation process. Install bolts number 1 through 5 onto the bodyside rear door hinge before tightening them to 33 N.m (24 lb ft). Attach the bolts to the doorside rear door hinge while tightening each one to match the torque values. Close the rear door before checking if it operates correctly and if the alignment is adequate.