How to service the Oil Pressure Switch on Chevrolet K3500?

The first task for servicing the oil pressure switch includes disconnecting the electrical connector which connects to the engine pressure sensor/switch. You need to use the Oil Pressure Sensor Socket (J 25254-10A) for removing the oil pressure switch. First step for installation is to mount the new oil pressure switch. The following installation steps will prevent fitting motion: apply a wrench while you secure the oil pressure switch at 30 Nm (22 ft. lbs.) using Oil Pressure Sensor Socket (J 25254-10A). Finally, reconnect the electrical connector.

How to disconnect and install the engine oil pressure switch on Chevrolet K3500?

Remove the electrical connector attached to the engine oil pressure gauge sensor and when holding the oil pressure sensor, make sure the gauge sits correctly before taking it off. Take out the engine oil pressure gauge sensor using (J 41712) and, if needed, also remove its fitting. Put sealant GM P/N 12346004 or its equal on the engine oil pressure sensor fitting, taking care not to lower the left side neck of the fitting after the initial torque has been applied. Insert and screw the oil pressure sensor fitting to a torque of 15 Nm (11 inch pounds); afterward, prevent the fitting from changing position much beyond 359°. Turn the engine oil pressure sensor fitting clockwise to the correct position which is 50° from the middle. Loosely thread the oil pressure gauge sensor until it is aligned with the sensor's fitting, keep the oil pressure gauge sensor fitting from turning with a wrench and tighten the sensor to 30 Nm (22 ft. lbs.) with (J 41712). Next, secure the electrical connector before starting the procedure.

OEM Chevrolet K3500 Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Pressure Switches found

View related parts
Chevrolet K3500 Oil Pressure Sending Unit Part Number: 14073454
$34.16 MSRP: $106.60
You Save: $72.44 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch; Sender, Engine Oil Pressure/Temperature; Sender, Oil Pressure Or Temperature
- Replaces: 10137603, 15564999
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet K3500 Oil Pressure Sensor Part Number: 19244501
$56.57 MSRP: $96.32
You Save: $39.75 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Fuel Pump & Engine Oil Pressure Indicator; Oil Pressure Switch; Oil Pressure Sending Unit; Engine Oil Pressure/Temperature Sensor; Fuel Pump Pressure Switch
- Replaces: 10243574, 12555492
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000, 1994 Chevrolet K3500 | Base, Cheyenne, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Oil Pressure Sending Unit Part Number: 19244935
$44.68 MSRP: $139.40
You Save: $94.72 (68%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch; Sender Kit, Engine Oil Pressure/Temperature; Sender, Engine Oil Pressure/Temperature
- Replaces: 15591103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet K3500 Oil Pressure Sensor Part Number: 19244500
$74.20 MSRP: $126.34
You Save: $52.14 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Pump Pressure; Oil Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12553175, 12555534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000, 1990-1993 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Oil Pressure Sending Unit Part Number: 19244933
$38.52 MSRP: $60.34
You Save: $21.82 (37%)
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch; Sender, Engine Oil Pressure/Temperature
- Replaces: 14036243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado
View related parts
Chevrolet K3500 Oil Pressure Sending Unit Part Number: 19244932
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch
- Replaces: 10069218
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado

Chevrolet K3500 Oil Pressure Switch

Want to cut long-term maintenance and repair costs? Choose OEM Oil Pressure Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet K3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet K3500 Oil Pressure Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet K3500 Oil Pressure produced from 1988 to 2002 is an essential part highlighted the dependability and power of Chevrolet's K3500 model. This essential switch displays oil pressure and any variation from the recommended range so that the engine's health and longevity can be preserved. With the help of the Oil Pressure Switch, the information concerning oil pressure is delivered shortly, which contributes to the improvement of the car's performance and safety at various conditions of the engine's work. Available in different models of the K3500, this Oil Pressure Switch is intended and built to complement the general structure and the strong Vortec engines of the Chevrolet K3500, another reliable pickup truck. The Oil Pressure Switch has been recognized in the automotive market as being accurately designed and very reliable, although it is a paramount factor in avoiding critical engine problems that can result from improper oil pressure. Furthermore, the economical Oil Pressure Switch plays an important role in the functioning of the K3500 and therefore can be considered as the essential characteristic of the model. The parts that make up the K3500 such as the Oil Pressure Switch, bears characteristics that not only improve the ride but also rank Chevrolet as a company that delivers reliable cars. All in all, one can learn about the Oil Pressure Switch and get convinced about the brand's work, which makes Chevrolet K3500 still one of the most demanded vehicles by those who value performance and reliability.

Chevrolet K3500 Oil Pressure Switch Parts Questions & Experts Answers

Oil Pressure Sensor
19244501
Q: How to service the Oil Pressure Switch on Chevrolet K3500?
A:
The first task for servicing the oil pressure switch includes disconnecting the electrical connector which connects to the engine pressure sensor/switch. You need to use the Oil Pressure Sensor Socket (J 25254-10A) for removing the oil pressure switch. First step for installation is to mount the new oil pressure switch. The following installation steps will prevent fitting motion: apply a wrench while you secure the oil pressure switch at 30 Nm (22 ft. lbs.) using Oil Pressure Sensor Socket (J 25254-10A). Finally, reconnect the electrical connector.
Oil Pressure Sensor
19244500
Q: How to disconnect and install the engine oil pressure switch on Chevrolet K3500?
A:
Remove the electrical connector attached to the engine oil pressure gauge sensor and when holding the oil pressure sensor, make sure the gauge sits correctly before taking it off. Take out the engine oil pressure gauge sensor using (J 41712) and, if needed, also remove its fitting. Put sealant GM P/N 12346004 or its equal on the engine oil pressure sensor fitting, taking care not to lower the left side neck of the fitting after the initial torque has been applied. Insert and screw the oil pressure sensor fitting to a torque of 15 Nm (11 inch pounds); afterward, prevent the fitting from changing position much beyond 359°. Turn the engine oil pressure sensor fitting clockwise to the correct position which is 50° from the middle. Loosely thread the oil pressure gauge sensor until it is aligned with the sensor's fitting, keep the oil pressure gauge sensor fitting from turning with a wrench and tighten the sensor to 30 Nm (22 ft. lbs.) with (J 41712). Next, secure the electrical connector before starting the procedure.