How to replace the valve rocker arm and push rod on Chevrolet K3500?

The first step for valve Rocker Arm and push rod replacement requires the disconnect of the negative Battery Cable. The first step requires removal of the valve Rocker Arm covers present on the Cylinder Head. The removal of push rod becomes possible when you first reduce the valve Rocker Arm bolt torque so it does not hinder the push rod extraction. Start by removing the valve Rocker Arm bolt from the Cylinder Head and then proceed to take out both the valve Rocker Arm as well as the guide before placing everything in proper order for reassembly. The first step is to pull out the Pushrod from inside the engine block. When putting the part together position the Pushrod into the correct area of the valve lifter followed by smearing clean engine oil over both bearing surfaces on the new valve Rocker Arm and balls. Put the Pushrod into the engine block followed by fixing the valve Rocker Arm bolt onto the Cylinder Head and tightening it to 54 nm (40 Nm ft. Lbs.). Install the valve Rocker Arm cover after completing valve arm weapon replacement procedures while restoring Battery Cable connections.

OEM Chevrolet K3500 Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rocker Arms found

View related parts
Chevrolet K3500 Rocker Arms
Part Number: 23500074
$19.45 MSRP: $32.03
You Save: $12.58 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Engine Valve Rocker; Rocker Arm
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet K3500 Rocker Arms
Part Number: 10089648
$27.43 MSRP: $42.99
You Save: $15.56 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Valve Rocker; Rocker Arm; Arm Kit, Engine Valve Adjusting & Rocker; Ball, Engine Valve Adjusting.
- Replaces: 12528897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet K3500 Rocker Arms
Part Number: 12523971
$18.09 MSRP: $24.78
You Save: $6.69 (27%)
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Valve Rocker; Rocker Arm; Arm Kit, Engine Valve Rocker; Arm, Engine Valve Rocker
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Rocker Arms
Part Number: 10112680
$13.11 MSRP: $22.91
You Save: $9.80 (43%)
ADD TO CART
Product Specifications
- Other Name: Arm; Rocker Arm; Arm Kit, Engine Valve Rocker; Arm, Engine Valve Rocker; Arm, Valve Rocker
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 7.4 L GAS

Chevrolet K3500 Rocker Arm

Our website offers an extensive catalog of genuine Chevrolet K3500 Rocker Arm at unbeatable prices. Every OEM Chevrolet K3500 Rocker Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet K3500 Rocker Arm Parts Questions & Experts Answers

Rocker Arms
23500074
Q: How to replace the valve rocker arm and push rod on Chevrolet K3500?
A: The first step for valve Rocker Arm and push rod replacement requires the disconnect of the negative Battery Cable. The first step requires removal of the valve Rocker Arm covers present on the Cylinder Head. The removal of push rod becomes possible when you first reduce the valve Rocker Arm bolt torque so it does not hinder the push rod extraction. Start by removing the valve Rocker Arm bolt from the Cylinder Head and then proceed to take out both the valve Rocker Arm as well as the guide before placing everything in proper order for reassembly. The first step is to pull out the Pushrod from inside the engine block. When putting the part together position the Pushrod into the correct area of the valve lifter followed by smearing clean engine oil over both bearing surfaces on the new valve Rocker Arm and balls. Put the Pushrod into the engine block followed by fixing the valve Rocker Arm bolt onto the Cylinder Head and tightening it to 54 nm (40 Nm ft. Lbs.). Install the valve Rocker Arm cover after completing valve arm weapon replacement procedures while restoring Battery Cable connections.