How should one safely drain oil from gas charged shock absorbers on Chevrolet K3500?

It is dangerous to remove the snap ring from inside the tube of gas charged shock absorbers due to high internal pressure that could release contents with explosive force. The prevention of injuries demands wearing safety glasses during both shock absorber center-punching and drilling operations while avoiding any hole in the shock absorber tube. Start the procedure by creating a 10 mm (0.4 inch) deep indentation at the tube bottom by using a center punch tool. Secure the shock absorber across a vise when its rod extends fully outward. Use a drill with a 5 mm (3/16-inch) bit to make a hole at the center punch point while using shop towels for the escaping oil. After drilling your first hole in the tube using the 5 mm (3/16 inch) drill bit at the center punch mark, make a new indentation at the middle of the tube with a center punch prior to drilling the second hole using the same drill bit. Use shop towels to manage the escaping oil at both steps. To drain all the shock absorber oil place the holes in the bottom position and pull the rod in and out of the tube while holding the shock absorber over the drain pan.

OEM Chevrolet K3500 Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Shock Absorbers found

View related parts
Chevrolet K3500 Shock, Front Part Number: 22064837
$82.83 MSRP: $113.41
You Save: $30.58 (27%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Suspension Shock Absorber; Shock Absorber; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 22064464, 22064835, 22064836, 22064332
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Front Part Number: 22064684
$38.99 MSRP: $78.31
You Save: $39.32 (51%)
ADD TO CART
Product Specifications
- Other Name: Absorber, Front Shock; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Rear Part Number: 12474719
$144.21 MSRP: $258.75
You Save: $114.54 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Shock
- Position: Rear
- Replaces: 15002529, 15991802
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber Part Number: 88945391
$50.06 MSRP: $89.39
You Save: $39.33 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Front Shock
- Position: Front
- Replaces: 12322249, 22065216
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber Part Number: 88945406
$69.18 MSRP: $123.54
You Save: $54.36 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Rear Shock; Shock
- Position: Rear
- Replaces: 22064686, 22064655, 22064649, 22064802, 22065092, 22064475, 22064653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1997 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock, Front Part Number: 22065212
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Shock Absorber; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 12322248, 22064012, 22064838, 22064633
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Rear Part Number: 22064830
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22064637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Rear Part Number: 12474721
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 15150926
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Front Part Number: 12474701
Product Specifications
- Other Name: Absorber Kit, Front Shock; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 15718077, 15002527, 22064460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1993 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber Part Number: 88945302
Product Specifications
- Other Name: Absorber, Front Shock; Shock
- Position: Front
- Replaces: 03187847, 22065209, 12322220, 22046408, 3187847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock, Front Part Number: 22064839
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Shock Absorber; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 22064011, 22064639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Front Part Number: 22064635
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Front Part Number: 22064417
Product Specifications
- Other Name: Absorber Assembly-Front Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Rear Part Number: 12474903
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Shock; Absorber Kit, Front And Rear Suspension; Absorber, Front Shock; Absorber, Rear Shock
- Position: Rear
- Replaces: 15718076, 22064461, 22064236, 22064275
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Absorber, Rear Part Number: 22064831
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22064638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Shock Part Number: 22064260
Product Specifications
- Other Name: Absorber, Shock; Suspension Shock Absorber; Shock Absorber; Absorber, Front And Rear Suspension
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2000 Chevrolet K3500 | Base, Cheyenne, LS, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

Chevrolet K3500 Shock Absorber

Want to cut long-term maintenance and repair costs? Choose OEM Shock Absorber. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet K3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet K3500 Shock Absorber includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet K3500 Shock Absorber is a highly germane part of the suspension system of K3500 models manufactured between 1980 and 2002. This component is responsible for reducing shock impulses and improving ride and handling thus it is a vital unit of the car whether it is used on-road or off-road applications. In essence, this component decelerates energy or movement in a bid to reduce the impact or jolt that stems from bumpy odd terrains and at the same time restricts excessive shock movement using hydraulic pistons and thus the Chevrolet K3500 Shock Absorber transforms kinetic force into heat. The K3500 has employed different kinds of shock absorbers such as the twin-tube and the mono-tube kinds which have their respective benefits in providing strength and cooling. Regarding the more complex functions, the Chevrolet K3500 Shock Absorber comes with Position Sensitive Damping (PSD) and Acceleration Sensitive Damping (ASD) which optimize the performance of the vehicle according to the condition of the road. This versatility is quite important on the K3500 model, a model that is mainly built with strong and sturdy body, and with Vortec engines that can handle tough jobs with the greatest of ease. The Chevrolet Shock Absorber can be named as one of the most demanded car products in automotive markets today because its main function is to deliver the maximal comfort and control for K3500 cars, thus, any K3500 owner should pay attention on its purchase. In general, Chevrolet Shock Absorber is the perfect representation of the Chevrolet brand, which is intimately linked to robustness and advances.

Chevrolet K3500 Shock Absorber Parts Questions & Experts Answers

Shock Absorber, Rear
22064830
Q: How should one safely drain oil from gas charged shock absorbers on Chevrolet K3500?
A:
It is dangerous to remove the snap ring from inside the tube of gas charged shock absorbers due to high internal pressure that could release contents with explosive force. The prevention of injuries demands wearing safety glasses during both shock absorber center-punching and drilling operations while avoiding any hole in the shock absorber tube. Start the procedure by creating a 10 mm (0.4 inch) deep indentation at the tube bottom by using a center punch tool. Secure the shock absorber across a vise when its rod extends fully outward. Use a drill with a 5 mm (3/16-inch) bit to make a hole at the center punch point while using shop towels for the escaping oil. After drilling your first hole in the tube using the 5 mm (3/16 inch) drill bit at the center punch mark, make a new indentation at the middle of the tube with a center punch prior to drilling the second hole using the same drill bit. Use shop towels to manage the escaping oil at both steps. To drain all the shock absorber oil place the holes in the bottom position and pull the rod in and out of the tube while holding the shock absorber over the drain pan.