Other Name: Absorber Kit, Front Shock; Absorber Kit, Front And Rear Suspension
Position: Front
Replaces: 19133612, 22400190
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
Chevrolet Silverado 2500 Shock Absorber
Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Shock Absorber at unbeatable prices. Every OEM Chevrolet Silverado 2500 Shock Absorber comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 2500 Shock Absorber Parts Questions & Experts Answers
Q: How should one safely drain oil from gas charged shock absorbers on Chevrolet Silverado 2500?
A: Breathing gas pressure inside shock absorbers presents a risk of dangerous explosive force so remove the snap ring from the tube top only if you have no need to eliminate this danger because it can cause severe personal injury. Wear protective safety glasses when piercing holes in the shock absorber while drilling while keeping the shock absorber tube safe from damage. Create a centered mark that measures 10 mm (0.4 inch) from the base of the tube through centerpunching. Secure the shock absorber to a vise position with its shock absorber rod in fully extended position. Use a 5 mm (3/16 inch) drill bit to make the hole at the centerpunch position and direct the escaping gas or gas/oil mixture while containing oil with shop towels. The next step requires creating a centerpunch indentation on the tube followed by drilling a 5 mm (3/16 inch) aperture at that point while using shop towels to collect the oil discharge. The shock absorber gets moved to a drain pan where you horizontally position it with the holes toward the floor. Then extend and retract the rod through the tube to drain all oil.