How to replace the canister purge valves on GMC Acadia?

To swap out the evaporative emission canister purge solenoid valve, it is first necessary to remove the fuel injector sight shield. Remove the chassis evaporative emission (EVAP) pipe quick connect fitting from the evap canister purge solenoid valve and the engine wiring harness electric connector from the valve. Then, remove the clip that is holding the evap canister purge tube quick connect fitting to the lower Intake Manifold, then remove the evap canister purge solenoid valve bracket bolt. Remove the evap canister purge solenoid valve (w/bracket) and evap canister purge tube, disconnecting the evap canister purge tube quick connect fitting from the valve. For installation, attach evap canister purge tube quick connect fitting to the evap canister purge solenoid valve and locate valve bracket to upper Intake Manifold. Mount the evap canister purge solenoid valve bracket bolt, then tighten down to 10 n.m (89 lb in). Connect the evap canister purge tube quick connect fitting at the upper Intake Manifold, the engine wiring harness electrical to connect to valve and finally, connect the chassis evap pipe quick connect fit(chain) to the valve. Finally, install the fuel injection sight shield.

OEM GMC Acadia Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Canister Purge Valves found

View related parts
GMC Acadia Purge Valve
Part Number: 12690512
$27.65 MSRP: $51.92
You Save: $24.27 (47%)
ADD TO CART
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids.; Purge Solenoid; Purge Control Valve
- Replaced by: 12737252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2016 GMC Acadia | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Purge Valve
Part Number: 12630282
$35.45 MSRP: $72.90
You Save: $37.45 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids.; Purge Solenoid; Purge Control Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | AT4, Denali, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Purge Valve
Part Number: 12632174
$34.29 MSRP: $64.40
You Save: $30.11 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids.; Purge Solenoid; Purge Control Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2021 GMC Acadia | SL, SLE, SLT | 4 Cyl 2.5 L GAS
View related parts
GMC Acadia Solenoid Valve
Part Number: 19432156
$51.24 MSRP: $104.06
You Save: $52.82 (51%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Replaced by: 19435149
- Replaces: 12591334, 12611801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 GMC Acadia | SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Solenoid Valve
Part Number: 85123399
$38.71 MSRP: $78.62
You Save: $39.91 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Purge Solenoid; Vent Control Solenoid; Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
- Replaces: 84802774, 84065747, 22740537
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Vapor Canister Purge Solenoid Valve
Part Number: 12666845
$17.24 MSRP: $32.38
You Save: $15.14 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly Evap Emis Cnstr Purge Sol; Purge Solenoid; Purge Control Valve; Regulator Valve; Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 GMC Acadia | Denali, SLE, SLT | 4 Cyl 2.0 L GAS

GMC Acadia Canister Purge Valves

Our website offers an extensive catalog of genuine GMC Acadia Canister Purge Valves at unbeatable prices. Every OEM GMC Acadia Canister Purge Valves comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Acadia Canister Purge Valves Parts Questions & Experts Answers

Solenoid Valve
19432156
Q: How to replace the canister purge valves on GMC Acadia?
A: To swap out the evaporative emission canister purge solenoid valve, it is first necessary to remove the fuel injector sight shield. Remove the chassis evaporative emission (EVAP) pipe quick connect fitting from the evap canister purge solenoid valve and the engine wiring harness electric connector from the valve. Then, remove the clip that is holding the evap canister purge tube quick connect fitting to the lower Intake Manifold, then remove the evap canister purge solenoid valve bracket bolt. Remove the evap canister purge solenoid valve (w/bracket) and evap canister purge tube, disconnecting the evap canister purge tube quick connect fitting from the valve. For installation, attach evap canister purge tube quick connect fitting to the evap canister purge solenoid valve and locate valve bracket to upper Intake Manifold. Mount the evap canister purge solenoid valve bracket bolt, then tighten down to 10 n.m (89 lb in). Connect the evap canister purge tube quick connect fitting at the upper Intake Manifold, the engine wiring harness electrical to connect to valve and finally, connect the chassis evap pipe quick connect fit(chain) to the valve. Finally, install the fuel injection sight shield.