How to replace the steering knuckle in the rear suspension on GMC Acadia?

Secondly, jack up and support the other end of the vehicle. Unscrew the rear Wheel Bearing and hub, the rear disc Brake Backing Plate assembly and the rear wheel drive shaft. Place a jack stand under the lower Control Arm, remove nut and bolt uniting the knuckle to the adjuster link. Next, be sure to remove the lower knuckle to lower Control Arm nut and bolt off, and the bolt and nut to the upper Control Arm to the knuckle off. The rear suspension link can be left on the lower Control Arm while doing this. After removing the knuckles of the upper and lower Control Arm, position with the new knuckle at its position and ensure all fasteners are loosely attached for alignment. Mount the bolt from the knuckle to the adjuster link and finger tighten the nut and then finish tightening to 75 n.m (55 lb ft) + 60 degrees. Mount the bolt to the upper Control Arm and the knuckle, finger tighten the nut, and then tighten to 100 n.m (74 lb ft) plus 60 degrees. Do the same with bolt from the lower Control Arm to the knuckle, finger tighten then tighten to 100 n.m (74 lb ft) + 60 degrees as well. After removing the jack stand, reinstall the rear wheel drive shaft, rear disc Brake Backing Plate assembly as well as rear Wheel Bearing and hub. Finally, take out the support and lower the vehicle.

OEM GMC Acadia Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Knuckles found

View related parts
GMC Acadia Knuckle, Rear Passenger Side Part Number: 23400078
$138.59 MSRP: $226.84
You Save: $88.25 (39%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 10391042
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Acadia | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Passenger Side Part Number: 25796983
$206.67 MSRP: $351.87
You Save: $145.20 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Acadia | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Driver Side Part Number: 25796982
$221.62 MSRP: $351.87
You Save: $130.25 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Acadia | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Rear Passenger Side Part Number: 84196225
$119.79 MSRP: $203.94
You Save: $84.15 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaced by: 26503837
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Rear Driver Side Part Number: 84196224
$123.81 MSRP: $203.94
You Save: $80.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaced by: 26503836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Passenger Side Part Number: 84560116
$45.54 MSRP: $111.12
You Save: $65.58 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 22985325, 84437325, 84437327
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Driver Side Part Number: 84560115
$81.23 MSRP: $139.53
You Save: $58.30 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 84437326, 84437328, 22985326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2023 GMC Acadia | AT4, Denali, SL, SLE, SLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
GMC Acadia Knuckle, Rear Driver Side Part Number: 10391041
$125.50 MSRP: $197.47
You Save: $71.97 (37%)
Product Specifications
- Other Name: Knuckle Assembly, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaced by: 23400077
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 GMC Acadia | Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS

GMC Acadia Steering Knuckle

Want to cut long-term maintenance and repair costs? Choose OEM Steering Knuckle. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Acadia parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Acadia Steering Knuckle includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Steering Knuckle of GMC Acadia vehicles is a major suspension and steering assembly that links the suspension and the steering system to front wheels of the car. It is prominently used at the areas where control arms, tie-rod ends, spindle or hub is located, through which the wheels are fixed. Steering knuckles let the suspension to move in the vertical direction due to the reaction to the road surface and rotate in the horizontal plane as a result of the steers input. Some of the differences are made in accordance with the type of the car's drive- rear or front/all; possible combination of the spindle and the methods of hub's connection. The modern steering knuckles have moved from the kingpins, and as a result, there has been increased durability and functionality of the knuckles which are usually long wear parts that are generally replaced only if they get damaged. It is wise to inspect the knuckle stud bores, spindles, and bushings periodically so as to have a clue of the optimal settings and safety measures to be used.

GMC Acadia Steering Knuckle Parts Questions & Experts Answers

Knuckle, Passenger Side
25796983
Q: How to replace the steering knuckle in the rear suspension on GMC Acadia?
A:
Secondly, jack up and support the other end of the vehicle. Unscrew the rear Wheel Bearing and hub, the rear disc Brake Backing Plate assembly and the rear wheel drive shaft. Place a jack stand under the lower Control Arm, remove nut and bolt uniting the knuckle to the adjuster link. Next, be sure to remove the lower knuckle to lower Control Arm nut and bolt off, and the bolt and nut to the upper Control Arm to the knuckle off. The rear suspension link can be left on the lower Control Arm while doing this. After removing the knuckles of the upper and lower Control Arm, position with the new knuckle at its position and ensure all fasteners are loosely attached for alignment. Mount the bolt from the knuckle to the adjuster link and finger tighten the nut and then finish tightening to 75 n.m (55 lb ft) + 60 degrees. Mount the bolt to the upper Control Arm and the knuckle, finger tighten the nut, and then tighten to 100 n.m (74 lb ft) plus 60 degrees. Do the same with bolt from the lower Control Arm to the knuckle, finger tighten then tighten to 100 n.m (74 lb ft) + 60 degrees as well. After removing the jack stand, reinstall the rear wheel drive shaft, rear disc Brake Backing Plate assembly as well as rear Wheel Bearing and hub. Finally, take out the support and lower the vehicle.