How to replace the front disc brake pads on GMC Terrain?

First thing that you should do in order to replace the front disc brake pads should be the inspection of the fluid level in the brake master cylinder reservoir; if it is at the midway point between maximum-full point and minimum allowable level watere is not required to be drained but if it is high, drain out to the midway point. Lift the vehicle and remove the tire and wheel assembly. Push a large c-clamp over the brake caliper body against the brake caliper outer Brake Pad and compress the Brake Caliper Piston completely into the brake caliper bore with a c-clamp. Prevent using air tools for the guide pin bolts; instead use hand tools and an open end wrench to hold the caliper guide pin lined when removing the lower brake caliper guide pin bolt. Lift the brake caliper towards you and locate the Brake Pad wear sensor, in order to install correctly, and remove the inner Brake Pad and outer Brake Pad and the upper and lower Brake Pad springs. In case of replacing brake pads, dispose of the old springs; insert, the inner Brake Pad and outer Brake Pad, and return the brake caliper back into the desired position. While holding the brake caliper, the pin of the guide with the help of a back up wrench, tighten the lower brake caliper guide pin bolt to 27 nm (20 lb ft). Reinstall the tire and wheel assembly, gradually press down the Brake Pedal to about 2/3rd of its travel distance with the engine off, then slowly release it until you work up through this cycle until afirm Brake Pedal is achieved to seat the Brake Caliper Piston and brake pads properly. Lastly, top up the master cylinder tank and burnish the brake pads and rotors.

OEM GMC Terrain Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Pads found

View related parts
GMC Terrain Brake Pads
Part Number: 84121520
$102.95 MSRP: $199.80
You Save: $96.85 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaced by: 85144100
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 84259368
$74.70 MSRP: $144.98
You Save: $70.28 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads; Front Pads
- Position: Front
- Replaces: 23303281
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 23214903
$160.95 MSRP: $312.38
You Save: $151.43 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaces: 20877794
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 20801538
$98.89 MSRP: $191.93
You Save: $93.04 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Disc Brake Pad Set; Rear Pads
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 13237753
$141.04 MSRP: $255.28
You Save: $114.24 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 GMC Terrain | SLE, SLT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 85143237
$76.62 MSRP: $148.72
You Save: $72.10 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Replaces: 84474215, 84650556
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 85129514
$84.81 MSRP: $166.04
You Save: $81.23 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Front Pads
- Replaces: 84775616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 GMC Terrain | AT4, Denali, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Terrain Brake Pads
Part Number: 85127904
$163.52 MSRP: $317.35
You Save: $153.83 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Rear Pads
- Position: Front
- Replaces: 13527902, 13595651
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS

GMC Terrain Brake Pad

Our website offers an extensive catalog of genuine GMC Terrain Brake Pad at unbeatable prices. Every OEM GMC Terrain Brake Pad comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Terrain Brake Pad Parts Questions & Experts Answers

Brake Pads
23214903
Q: How to replace the front disc brake pads on GMC Terrain?
A: First thing that you should do in order to replace the front disc brake pads should be the inspection of the fluid level in the brake master cylinder reservoir; if it is at the midway point between maximum-full point and minimum allowable level watere is not required to be drained but if it is high, drain out to the midway point. Lift the vehicle and remove the tire and wheel assembly. Push a large c-clamp over the brake caliper body against the brake caliper outer Brake Pad and compress the Brake Caliper Piston completely into the brake caliper bore with a c-clamp. Prevent using air tools for the guide pin bolts; instead use hand tools and an open end wrench to hold the caliper guide pin lined when removing the lower brake caliper guide pin bolt. Lift the brake caliper towards you and locate the Brake Pad wear sensor, in order to install correctly, and remove the inner Brake Pad and outer Brake Pad and the upper and lower Brake Pad springs. In case of replacing brake pads, dispose of the old springs; insert, the inner Brake Pad and outer Brake Pad, and return the brake caliper back into the desired position. While holding the brake caliper, the pin of the guide with the help of a back up wrench, tighten the lower brake caliper guide pin bolt to 27 nm (20 lb ft). Reinstall the tire and wheel assembly, gradually press down the Brake Pedal to about 2/3rd of its travel distance with the engine off, then slowly release it until you work up through this cycle until afirm Brake Pedal is achieved to seat the Brake Caliper Piston and brake pads properly. Lastly, top up the master cylinder tank and burnish the brake pads and rotors.