Make sure this part fits

GM 25838821
Shift Control Cable

2006-2011 GM

Customer Questions & Expert Answers (14)
GM 25838821 Shift Control Cable
GM 25838821 Shift Control Cable
  • Part Description
    Cable Assembly-Automatic Transmission Range Selector Lever
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number25838821
    Part DescriptionCable Assembly-Automatic Transmission Range Selector Lever
    Other NamesCable, Transmission Shift Control Cable
    Item Dimensions13.6 x 13.4 x 3.4 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25838821
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25838821 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25838821 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Replace a Shift Cable in a Range Selector Lever on Cadillac DTS? Posted by Customer
    A:
    The first step in replacing the Shift Cable requires setting the park brake and chocking of wheels. The retainer should be fully removed from the transaxle shift cable mechanism before disconnecting the transaxle shift cable terminal from the shift lever pin on the manual pin. The transaxle shift cable becomes detached from its bracket when users push the locking tabs inside. After removing the left closeout/insulator panel users should disconnect the transaxle shift cable terminal that is attached to the shift lever pin. Keep the locking tabs of the transaxle shift cable mechanism pushed inside so that you can remove the cable from its bracket. Remove the shift cable after unplugging the grommet at the cowl panel of the vehicle. The installation requires you to put the shift cable through the cowl panel before placing the grommet in position. Complete insertion of the transaxle shift cable into the bracket will result in automatic bracket snapping followed by terminal connection to the shift lever pin. Reinstall the left closeout/insulator panel after installing the retainer to the transaxle shift cable mechanism. Fuel up the transaxle shift cable terminal with the transaxle manual shift lever pin while driving it into the bracket. The procedure ends with installing the retainer on the transaxle shift cable mechanism and adjusting the automatic transmission shift cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be unplugged at the cowl panel for the 2008 Buick Lucerne? Posted by Customer
    A:
    Unplug the shift cable grommet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the final step in the process for the 2010 Buick Lucerne? Posted by Customer
    A:
    Adjust the range selector cable as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the final step in the installation process for the 2006 Buick Lucerne? Posted by Customer
    A:
    Insert the retainer into the mechanism and adjust the range selector cable accordingly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the next step after releasing the cable from the bracket for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the console trim plate and disconnect the transaxle range selector cable terminal from the shift lever pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the next step after disconnecting the cable terminal for the 2007 Buick Lucerne? Posted by Customer
    A:
    Press the locking tabs inward to release the transaxle range selector cable from the bracket and remove the left closeout/insulator panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What should be done after setting the park brake for the 2008 Buick Lucerne? Posted by Customer
    A:
    Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the next step after removing the console trim plate for the 2009 Buick Lucerne? Posted by Customer
    A:
    Remove the transmission range selector cable terminal from the shift control pin and take out the transmission range selector cable from the shift control base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the next step after disconnecting the cable terminal for the 2007 Cadillac DTS? Posted by Customer
    A:
    Pull the lock release and remove the transaxle range selector cable from the console, then unplug the shift cable grommet at the cowl panel and remove the shift cable from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What should be removed after setting the park brake for the 2010 Cadillac DTS? Posted by Customer
    A:
    Remove the range selector cable retainer and disconnect the transmission range selector cable terminal from the transmission manual shift lever pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What is the next step after removing the left closeout/insulator panel for the 2008 Cadillac DTS? Posted by Customer
    A:
    Disconnect the transaxle range selector cable terminal from the shift lever pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    What should be done after installing the retainer for the 2009 Cadillac DTS? Posted by Customer
    A:
    Reinstall the left closeout/insulator panel, insert the transaxle range selector cable into the bracket, and connect the transaxle range selector cable terminal to the transaxle manual shift lever pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    Q:
    How do you disconnect the transaxle range selector cable for the 2006 Cadillac DTS? Posted by Customer
    A:
    Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shift Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 25838821, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 25838821 Shift Control Cable. It is sometimes referred to as GM Shift Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 25838821 Shift Control Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery