GM 12487638
Wiper Blade, Passenger Side

You need to position the wipers at middle stroke before taking out the wiper arms to dodge contact with the rear edge of the hood. To separate the Wiper Arm, push the retention button and lift the wiper from the inner Wiper Arm hook. Slide the complete Wiper Arm outside through the Wiper Blade. To install the Wiper Blade slide the hook onto the opening and move the Wiper Blade pivot until it fits inside the Wiper Arm hook. Push the Wiper Blade pivot into the Wiper Arm hook until the pull mechanism clicks to keep the blade firmly attached. After setting the wipers to park again you must test if all wipers function correctly.

To start, push in the button of the Wiper Blade clip to take out the Wiper Blade from the inside of the Wiper Arm, then take the hook from the Wiper Arm and place it out through the blade. Fit the Wiper Arm hook into the opening in the Wiper Blade, set the blade pivot into the inside curve of the Wiper Arm, and keep squeezing until it is locked. After installation, use the wipers to see if they work right.

Locate the wiper blades at their midpoint on the glass to shield the wiper arms from scraping against the back hood edge. After pushing the button on the Wiper Blade clip you can take off the Wiper Blade from inside the Wiper Arm radius and then pull the Wiper Arm through the blade opening. Position the Wiper Blade pivot on the inside radius of the Wiper Arm hook then push the blade hook through the Wiper Arm opening. Make sure the Wiper Blade pivot fits securely into the hook at the end of the Wiper Arm by pulling it down until it locks. To test if the wipers work correctly return all blades to the park position then switch on the wipers.

Cycle the wiper blades to the mid-wipe position on the glass to avoid contact with the rear edge of the hood.

Cycle the wiper blades to the mid-wipe position on the glass to avoid contact with the rear edge of the hood.

Cycle the wiper blades to the mid-wipe position on the glass to avoid contact with the rear edge of the hood.

Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm, then bring the wiper arm out through the opening in the wiper blade.

Guide the wiper blade element through the wiper blade claw sets and engage the bottom claw of the wiper blade into the notches in the wiper blade element.

Install the wiper blade onto the wiper arm.

Return the wiper blades to the park position and operate the wipers to check for proper function.

Insert the open end of the wiper blade element into the bottom claws of the wiper blade, making sure to keep the wiper blade claws in the rubber claw channel of the wiper blade element and preventing contact with the metal spline.

Take out the bottom claws of the wiper blade from the notches in the wiper blade element and pull the wiper blade element out through the wiper blade claws.

Finally, install the wiper blade onto the wiper arm.