Cadillac CTS Parts

Cadillac CTS Parts Questions & Answers

• Emblem, Front
  15851892
  Q: How to replace the grille emblem on Cadillac CTS?

  A: Heat the loose emblem with the Heat Gun (J 25070) by moving it 152 mm (6 in) from the emblem surface while using circular heat movements until it becomes easily removable from the grille. First separate either the wreath or crest from the grille while avoiding contact with the painted surface. First remove all old emblem adhesive with a plastic flat-bladed tool and then clean the area using 3M(R) P/N 07501 or an equivalent adhesive remover. A ring-free towel should be used to wipe the emblem site after cleaning it with warm soapy water followed by dry-down. To apply the emblem use a 50/50 isopropyl alcohol and water mixture on a clean lint-free cloth while avoiding contact with the adhesive tape or dirt. Line up pins (1 and 2) from the emblem backing with grille holes then apply firm pressure for 30 seconds to guarantee correct adhesive bonding.
• Alternator
  84009359
  Q: How to replace the alternator (LY7) without direct fuel injection on Cadillac CTS?

  A: Begin generator (LY7) replacement by disconnecting the battery negative cable first before proceeding. Next remove the Drive Belt from the generator. First lift and support the vehicle before removing the electrical connector from the generator. Access the generator output bat terminal by moving the protective boot aside then unscrew the generator output bat terminal nut until the battery positive lead disconnects from the generator. Start by removing the lower bolts from the generator then lower the vehicle before unscrewing the upper bolt to pull out the generator from the engine. The generator needs to be placed onto its designated spot on the engine where it will be secured through the upper bolt installation mechanism. Secure the vehicle position with support tools before tightening lower bolts to 50 n.m (37 lb ft). Secure the generator bat terminal nut with 13 n.m (115 lb in) torque while connecting the battery positive lead and install the bat terminal boot. Start by connecting the electrical connector to the generator, then lower the vehicle to align the generator Drive Belt. After that, reattach the battery negative cable.
• Steering Wheel
  10378489
  Q: How to replace the steering wheel on Cadillac CTS?

  A: You must disable SIR system before replacing the steering wheel. The inflatable restraint steering wheel module needs removal along with the steering column electrical connector removal. Proceed by taking off the steering wheel retaining nut. Use Steering Wheel Puller Legs (J42578) and Steering Wheel Puller (J1859-A) to attach to the steering wheel before using these tools to remove it. Start by placing the steering wheel onto its column while you install the retaining nut and apply 41 Nm (30 ft.lbs.) of tightness. After connecting the steering column electrical connector you should proceed with module inflator installation after turning on the SIR system.
• Console Base, Gray
  25740592
  Q: How to replace the front center console on Cadillac CTS?

  A: Start with the removal of shifter trim cover followed by disconnecting the electrical connector. Start by removing the console side trim panels then unscrew the 6 floor mounting screws before extracting the console from the vehicle. Place the console on floor and install its screws using a torque of 25 Nm (18 lb ft). Reconnect the shift indicator lamp electrical connector while reinstalling the console side trim panels before putting the shifter trim cover back.