ChevyParts
My Garage
My Account
Cart
OEM Cadillac CTS Drive Shaft
Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
17 Drive Shafts found
Cadillac CTS Drive Shaft, Front
Part Number: 84150924$444.41 MSRP: $705.59You Save: $261.18 (38%)Ships in 1-2 Business Days
Cadillac CTS Drive Shaft
Part Number: 25752723$243.81 MSRP: $904.77You Save: $660.96 (74%)Ships in 1-2 Business Days
Cadillac CTS Drive Shaft
Part Number: 20892620$460.02 MSRP: $727.07You Save: $267.05 (37%)Ships in 1-3 Business DaysCadillac CTS Drive Shaft
Part Number: 23465054$644.65 MSRP: $1256.61You Save: $611.96 (49%)Ships in 1-3 Business DaysCadillac CTS Drive Shaft
Part Number: 23440333$743.48 MSRP: $1443.18You Save: $699.70 (49%)Ships in 1-3 Business Days
Cadillac CTS Drive Shaft
Our website offers an extensive catalog of genuine Cadillac CTS Drive Shaft at unbeatable prices. Every OEM Cadillac CTS Drive Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac CTS Drive Shaft Parts Questions & Experts Answers
- Q: How to replace the rear Drive Shaft with MX7 or MN6 on Cadillac CTS?A: The first process to change a rear propeller shaft into an mx7 or mn6 begins by elevating and supporting the vehicle. First detach the rear Muffler together with the floor pan mid tunnel insulation. The propeller shaft needs temporary support through a suitable jack stand placed at the center support bearing before removing its mounting bolts. The propeller shaft coupler should not disconnect from its shaft during the bolt removal process which connects the coupler to the differential flange. Use proper maintenance procedures to separate the propeller shaft nuts, bolts and washers while changing out all faulty or worn-out elements. Use a flat-bladed screwdriver to remove the propeller shaft from the transmission/transfer case flange after detaching all bolts from its CV Joint at the transmission/transfer case flange. To proceed with removal, first uninstall the propeller shaft from the rear differential flange before taking it out of the vehicle. When installing the shaft users need to apply gm p/n 1051344 (Canadian P/N 993037) lubricant to its center bushing and differential flange pilot shaft. A helper should guide the propeller shaft installation before adding the center support bearing together with any necessary shims when available. The installation of mounting bolts to the center support bearing requires torque to 50 nm (37 lb ft) with the propeller shaft and drive flange dots in alignment to avoid vibrations. Clean the threads on propeller shaft-to-flange nuts along with bolts with denatured alcohol and then apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) to let the compound cure for approximately ten minutes. The procedure begins with differential flange installation of the propeller shaft coupler then adds the bolt and washer before torquing the nuts that attach the coupler-to-differential flange to 85 nm (63 lb ft). The installation process requires the floor pan mid tunnel insulator and exhaust system reinstallation with proper vehicle lowering procedures after tightening the propeller shaft CV Joint to transfer case flange bolts in sequence (1-6) to 40 nm (29 lb ft).
