Make sure this part fits

GM 22692206
Boot Kit, Front

2004-2010 GM

Customer Questions & Expert Answers (5)
GM 22692206 Boot Kit, Front
  • Part Description
    Boot Kit, Front Wheel Drive Axle Shaft; CV Boot
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2010 Chevrolet HHRSS, SS Panel4 Cyl 2.0 L GAS
    2004-2010 Chevrolet MalibuBase, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2010 Pontiac G6Base, GT, GTP, GXP4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
    2007-2009 Saturn AuraGreen Line, Hybrid, XE, XR4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22692206 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22692206 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the CV joint from the wheel drive shaft for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Use a block of wood and a hammer to remove the CV joint from the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the housing be installed over the tripot joint spider assembly for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Position the larger new seal retaining clamp on the halfshaft inboard seal and slide the housing over it, locating the lip of the seal in the groove.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the final step in securing the outboard seal for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Slide the large diameter of the outboard seal with the large seal retaining clamp over the CV joint outer race and locate the seal lip in the groove, then crimp the seal retaining clamp using J 35910 to 174 Nm (130 lb ft), checking the gap dimension on the clamp ear and tightening until the gap dimension of 1.9 mm (5/64 in) is reached.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the boot be positioned on the wheel drive shaft during assembly for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Ensure the boot is seated in the groove of the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Boot Kit, Front 22692206 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22692206 Boot Kit, Front is available in the market under the name GM CV Boot. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22692206 Boot Kit, Front fits certain Chevrolet Malibu, HHR models, as well as Pontiac G6. Additionally, it is compatible with Saturn Aura models.
The original GM component designated by manufacturer part number 22692206 maintains top performance when functioning as the Boot Kit, Front Wheel Drive Axle Shaft; CV Boot unit at its Front. The component 22692206 is constructed from durable material and its dimensions span 6.1 x 4.4 x 4.3 inches while weighing 1.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner Boot; Outer Boot; Boots. The part 22692206 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 22692206. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.