Make sure this part fits

GM 9156605
Lower Control Arm Bushing, Rear

1997-2001 Cadillac Catera

Customer Questions & Expert Answers (5)
GM 9156605 Lower Control Arm Bushing, Rear
  • Part Description
    Bushing, Front Lower Control Arm Rear; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing
  • Position
    Rear Lower
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2001 Cadillac CateraBase, Sport6 Cyl 3.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 9156605 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 9156605 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear axle lower control arm bushings on Cadillac Catera? Posted by Customer
    A:
    A proper bushing replacement procedure begins by lifting and supporting the vehicle before tire removal and wheel detachment. Start by removing the rear axle lower Control Arm before you trim off the inboard bushing collar and follow it with a cut on the outboard lower Control Arm's rubber collar. Replace the bushing with help from a 30 mm socket and Control Arm bushing installer (J 21474-01) and rear Control Arm bushing bolt (J 42200). Before installing new bushings apply lubrication for smooth insertion then place the inboard bushing collar facing the rear Differential direction. When pressing the new bushing into place use a 30 mm socket alongside Control Arm bushing installer (J 21474-5) and rear Control Arm bushing bolt (J 42200). Mostly follow the installation order with the outboard side bushing receiving silicone spray before setting it up using a 30 mm socket, Control Arm Bushing installer (J 21474-5), and rear Control Arm bushing bolt (J 42200) to push in the new bushing. The vehicle requires replacement of the rear axle lower Control Arm followed by tire and wheel reinstallation with vehicle height adjustment.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tools are used to press out the vertical bushing for the 2001 Cadillac Catera? Posted by Customer
    A:
    Use the Bushing Receiver (J 21474-5), 3/8 Inch Nut (J 21474-18), and 3/8 Inch Bolt (J 21474-19) to press out the vertical bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What tools are needed to press out the bushing for the 2000 Cadillac Catera? Posted by Customer
    A:
    A 30 mm socket, the Bushing Receiver (J21474-01), and the Rear Control Arm Bushing Bolt (J42200).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the final step in the installation process for the 2000 Cadillac Catera? Posted by Customer
    A:
    Position the J42091-1 and J42092-2 to press the horizontal bushing into the lower control arm until flush, and finally, install the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm Bushing, Rear 9156605 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9156605 Lower Control Arm Bushing, Rear is available in the market under the name GM Control Arm Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9156605 Lower Control Arm Bushing, Rear fits certain Cadillac Catera models.
The original GM component designated by manufacturer part number 9156605 maintains top performance when functioning as the Bushing, Front Lower Control Arm Rear; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing unit at its Rear Lower. The component 9156605 is constructed from durable material and its dimensions span 2.6 x 2.6 x 1.1 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bushings; Bushing, Steering Knuckle Lower Control Arm. The part 9156605 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.