To change the front lower Control Arm Bushing, first, lift and support the vehicle. Next, take off the tire and wheel. Later pull out the lower Control Arm and the lower Control Arm to rear bushing bolt. Mark the position of the bushing while removing and remove from the lower Control Arm. During fixing, install the new bushing into the lower Control Arm in the same location as previously mentioned. Apply locktite(TM) 234 or equivalent on the threads of the bolt and install the lower Control Arm to bushing bolt; while holding the rear bushing inner sleeve, tighten to the bushings to the Control Arm bolt, to 44 n.m (32 lb ft). Reinstall the lower Control Arm and follow up with the tire and wheel, and then lower the vehicle.