Make sure this part fits

GM 42589352
Stabilizer Bar Bushing

2004-2011 GM

Customer Questions & Expert Answers (8)
GM 42589352 Stabilizer Bar Bushing
  • Part Description
    Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing
  • Position
    Front
  • Replaces
    96870461, 96535092, 96653351, 96435292
  • Manufacturer
    General Motors
Make sure this part fits
$4.88 MSRP: $8.03
You Save: $3.15 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number42589352
    Part DescriptionInsulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing
    Other NamesBushings; Bushing, Upper Control Arm Shaft; Bushing, Stabilizer Shaft
    Item Dimensions5.6 x 4.0 x 1.7 inches
    Item Weight0.40 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces96870461, 96535092, 96653351, 96435292
    ManufacturerGeneral Motors
    SKU42589352
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2011 Chevrolet AveoBase, LS, LT, Special Value4 Cyl 1.6 L GAS
    2007-2011 Chevrolet Aveo5LS, LT, Special Value4 Cyl 1.6 L GAS
    2009-2010 Pontiac G3Base4 Cyl 1.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 42589352 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 42589352 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear axle lower control arm bushing on Chevrolet Aveo? Posted by Customer
    A:
    A technician must first lift the vehicle before securing it to support then detach the rear axle before fixing it on the workbench. An industrial hot air dryer should heat the rear axle bushing area up to 50-75°c (122-158°F). The housing should be placed onto the rear axle using the rear Control Arm Bushing servicing set (29376-A). Use the Control Arm Bushing set (21474-01) and the rear Control Arm Bushing servicing set (29376-A) to pass the screw assembly (21474-19) through the bushing remover (29376-6-A) into the rear Control Arm Bushing and the receiver cap (29376-7). Using a screw assembly (21474-19) and long nut (21474-18) while holding the screw assembly road the long nut to remove part of the bushing. Strike the bushing remover (29376-6-A) with the remover/installer (KM-266-A) to completely remove the bushing. To mount the housing on the rear axle you need both the rear Control Arm Bushing servicing set (29376-A) and the Control Arm Bushing set (21474-01). Handle the screw assembly (21474-19) to insert it past the thrust washer into the receiver cap (29376-7) before moving it through the bushing and the bushing installer (29376-6-A). Mount the screw assembly (21474-19) onto the long nut (21474-18) while twisting the long nut (21474-18) to achieve a 45-degree (a) bushing slope relative to the rear axle axis. After installation of the rear axle proceed to lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the bushings for the 2010 Chevrolet Aveo? Posted by Customer
    A:
    Reinstall the front lower control arm assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What tools are needed to press off the rear bushing for the 2004 Chevrolet Aveo? Posted by Customer
    A:
    Use a press along with the KM-158 and KM-307-B to press off the rear bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the first step to replace the front lower control arm bushing for the 2007 Chevrolet Aveo? Posted by Customer
    A:
    First, remove the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How do you install the new rear bushing for the 2008 Chevrolet Aveo? Posted by Customer
    A:
    Install the new rear bushing using the CH-48358-3 on the rear bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the process for installing the front bushing for the 2009 Chevrolet Aveo? Posted by Customer
    A:
    Place the KM-307-B on a press, position the KM-508-4 on the KM-307-B, place the control arm on the KM-508-4, followed by the KM-508-2 on the control arm. Lubricate the outside of the front bushing and the inside of the front bushing hole in the control arm, then place the front bushing in the KM-508-2, aligning the plus signs with the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the first step to replace the rear axle lower control arm bushing for the 2006 Chevrolet Aveo? Posted by Customer
    A:
    Begin by raising and supporting the vehicle appropriately.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 42589352, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 42589352 Stabilizer Bar Bushing. It is sometimes referred to as GM Control Arm Bushing, GM Sway Bar Bushing. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 42589352 Stabilizer Bar Bushing. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery