Q: How to Ensure Proper Installation of Coil Spring Insulators on Chevrolet Camaro?
A: The vehicle needs to rest on its frame for full suspension extension before proceeding with rear Coil Spring Insulator replacement. Start replacement work by removing the rear coil spring followed by removal of the spring upper insulator. Install the spring upper insulator at the upper section of the coil spring before placing back the rear coil spring .
Q: How to replace the coil spring insulators on Chevrolet Malibu?
A: Proper lifting equipment must support the vehicle to allow access to replace the coil spring insulators starting first. Follow the coil spring replacement procedure to take out the coil spring. First remove the coil spring then remove coil spring insulators from both lower Control Arm and vehicle body components. Before installation you need to position the new coil spring insulators onto the lower Control Arm and vehicle body before reinstalling the coil spring.
Q: How to replace the coil spring insulators on Chevrolet Equinox?
A: The coil spring must be removed before replacing its insulators. First separate the rubber insulators which support the coil spring through its upper and lower regions. Special spray silicon lubricant should be applied to new insulators before they are installed. The part number identification tape on Coil Springs must face outward from the vehicle while located at the highest point on the spring. Proper installation of both upper and lower coil spring insulators requires complete contact between them and the spring. Place the upper and lower rubber insulators onto the coil spring before reinstallation of the entire component.