Make sure this part fits

GM 90223456
Control Arm Bushing

1997-2001 Cadillac Catera

Customer Questions & Expert Answers (5)
GM 90223456 Control Arm Bushing
  • Part Description
    Bushing, Rear Axle Control Arm; Axle Beam Mount
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number90223456
    Part DescriptionBushing, Rear Axle Control Arm; Axle Beam Mount
    Other NamesLower Control Arm Outer Bushing
    Item Dimensions7.1 x 7.4 x 2.6 inches
    Item Weight0.70 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU90223456
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2001 Cadillac CateraBase, Sport6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 90223456 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 90223456 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear axle lower control arm bushings on Cadillac Catera? Posted by Customer
    A:
    Initiate rear axle lower Control Arm Bushing replacement by first lifting the vehicle then supporting it. Next remove the tire and wheel assembly before proceeding. Initial steps require removing the rear axle lower Control Arm then cutting off the inboard lower Control Arm Bushing collar before cutting off the rubber collar on the outboard lower Control Arm. A 30 mm socket together with the bushing receiver (J21474-01) and the rear Control Arm Bushing bolt (J42200) are needed to press out the bushing. Start by applying lubricant to the new bushings before you should install the inboard bushing with its collar facing the rear Differential then use a 30 mm socket together with the bushing receiver (J21474-5) and rear Control Arm Bushing bolt (J42200) to push in the new bushing. Apply silicone spray to the outboard side bushing before installing it and press the new bushing into place with a 30 mm socket, the bushing receiver (J21474-5) and the rear Control Arm Bushing bolt (J42200). After installing the rear axle lower Control Arm, replace the tire and wheel assembly while lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tools are used to press out the vertical bushing for the 2000 Cadillac Catera? Posted by Customer
    A:
    Use the J21474-18, J21474-5, J42112-4, and J21474-19 to press out the vertical bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    What is the final step after installing the bushings for the 2001 Cadillac Catera? Posted by Customer
    A:
    Reinstall the rear axle lower control arm, the tire and wheel, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    Q:
    How do you install the horizontal bushing for the 2001 Cadillac Catera? Posted by Customer
    A:
    Use the Front Lower Control Arm Horizontal Bushing Remover/Installer Kit (J 42092) to press the horizontal bushing into the lower control arm until flush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm Bushing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 90223456, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 90223456 Control Arm Bushing. It is sometimes referred to as GM Control Arm Bushing, GM Trailing Arm Bushing, GM Axle Beam Mount, GM Axle Pivot Bushing, GM Axle Support Bushings. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 90223456 Control Arm Bushing. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery