Make sure this part fits

GM 88987107
Positive Cable

2004-2009 Cadillac XLR

Customer Questions & Expert Answers (7)
GM 88987107 Positive Cable
  • Part Description
    Cable Assembly, Battery Positive; Battery Cables
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88987107
    Part DescriptionCable Assembly, Battery Positive; Battery Cables
    Other NamesCable, Battery(Positive)
    Item Dimensions11.4 x 10.0 x 4.6 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88987107
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88987107 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88987107 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the positive battery cable on Cadillac XLR? Posted by Customer
    A:
    Users need to begin by unlinking the negative Battery Cable from the battery and afterward disconnecting the positive Battery Cable from the battery terminal. Use the stud cover to access the fuse/relay center and disconnect from it first the positive Battery Cable nut from its study and then the positive Battery Cable lead from the matching study. Secondly you disconnect the starter jumper wiring harness from the engine harness connector while also removing Battery Cable clips along with the Intake Manifold. Fasten the Starter Solenoid and front suspension crossmember by removing their respective positive Battery Cable terminal nut along with the terminals. Dock the generator end of the battery positive/starter cable by moving the boot upwards on the cable then unthreading the battery positive/starter cable nut while finally extracting the battery positive/starter cable terminal from the stud. Twist off the bolt keeping the cable and clip attached to the engine front before taking off the positive Battery Cable. The first step of cable installation involves fitting the cable terminal onto the generator stud between its 2 and 4 o'clock position before tightening the terminal nut to 20 n.m (15 lb ft). Place the boot over the stud and nut before using a bolt to fix the cable retaining clip to the front of the engine while securing it with a torque of 35 n.m (26 lb ft). The large and small Starter Solenoid nuts require 10 n.m (89 lb in) and 4 n.m (35 lb in) torque while installing the positive Battery Cable terminal. Position the engine harness leads on the solenoid in front of installing the positive cable terminal. Insert the battery clips before hooking up the positive Battery Cable lead to the fuse/relay center stud then secure the positive Battery Cable nut to the fuse/relay center stud at 10 n.m (89 lb in). Close the stud cover of the fuse/relay center, install the positive Battery Cable to the battery while tightening it to 8 n.m (71 lb in), and complete this procedure with the negative Battery Cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after connecting the generator cable for the 2009 Cadillac XLR? Posted by Customer
    A:
    Slide the boot back into place over the stud and the nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the final step in the process for the 2008 Cadillac XLR? Posted by Customer
    A:
    Connect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the process for disconnecting the positive battery cable terminal from the starter solenoid for the 2007 Cadillac XLR? Posted by Customer
    A:
    Remove the positive battery cable terminal nut and disconnect the terminals from the starter solenoid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after removing the supercharger for the 2009 Cadillac XLR? Posted by Customer
    A:
    Disconnect the starter jumper wiring harness from the engine harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the procedure for installing the battery negative cable for the 2005 Cadillac XLR? Posted by Customer
    A:
    Connect the battery negative cable to the battery and tighten the terminal bolt to 8 N.m (71 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88987107, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88987107 Positive Cable. It is sometimes referred to as GM Battery Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88987107 Positive Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery