Make sure this part fits

GM 15791898
Cable

2005-2012 GM

Customer Questions & Expert Answers (17)
GM 15791898 Cable
  • Part Description
    Cable, Radio Antenna
  • Replaces
    15222896
  • Manufacturer
    General Motors
Make sure this part fits
$34.15 MSRP: $60.98
You Save: $26.83 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15791898
    Part DescriptionCable, Radio Antenna
    Item Dimensions14.2 x 13.9 x 3.6 inches
    Item Weight0.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15222896
    ManufacturerGeneral Motors
    SKU15791898
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2012 Chevrolet ColoradoLS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2005-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15791898 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15791898 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the antenna mast for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Remove the grommet and cable from the routing hole, and take the antenna cable out of the vehicle, leaving the mechanics wire in place for assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What tool should be attached to the antenna cable for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Attach a mechanics wire to the antenna cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should you do after securing the new cable for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Connect the radio extension antenna cable, close the instrument panel compartment door, reinstall the radio, and put the accessory trim panel back in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What needs to be reattached after installing the coax cable for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Attach the coax cable retainer to the hinge pillar and the coax cable retainer to the I/P.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    How do you remove the extension cable for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Remove the extension cable from the vehicle and detach the coax cable retainer from the I/P.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What is the first step to replace the antenna cable for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Remove the right front door sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should be done after disconnecting the antenna connectors for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Detach the fasteners securing the coax cable to the header panel and remove the 3 coax cable retainers from the windshield pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What needs to be disconnected before removing the extension cable for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the radio extension antenna cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should be done after removing the accessory trim panel for the 2008 GMC Canyon? Posted by Customer
    A:
    Take out the radio and lower the instrument panel (I/P) compartment door fully.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should be done after installing the coax cable behind the I/P for the 2007 GMC Canyon? Posted by Customer
    A:
    Attach the coax cable retainer to the hinge pillar and retainer to the I/P.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should you do after disconnecting the antenna cable for the 2005 GMC Canyon? Posted by Customer
    A:
    Attach a mechanics wire to the antenna cable, then remove the antenna mast and the screws retaining the antenna base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What is the first step for installation of the new cable for the 2009 GMC Canyon? Posted by Customer
    A:
    Install the new cable into the vehicle and secure it with the clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should be done after removing the panels for the 2006 GMC Canyon? Posted by Customer
    A:
    Disconnect the radio antenna cable from the extension cable and remove the grommet from the hinge pillar in an outbound direction.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should be done with the extension cable for the 2006 GMC Canyon? Posted by Customer
    A:
    Remove the extension cable from the vehicle and detach the coax cable retainer from the I/P.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    How do you install the new antenna cable for the 2010 GMC Canyon? Posted by Customer
    A:
    Attach the mechanics wire to the end of the antenna cable and pull on it to route the cable and grommet through the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    Q:
    What should be done after securing the new cable for the 2010 GMC Canyon? Posted by Customer
    A:
    Connect the radio extension antenna cable and close the I/P compartment door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Antenna Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15791898, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15791898 Cable. It is sometimes referred to as GM Antenna Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15791898 Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery