Make sure this part fits

GM 22640020
Rear Cable

1997-2005 GM

Customer Questions & Expert Answers (7)
GM 22640020 Rear Cable
  • Part Description
    Cable, Parking Brake; Brake Cable
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2003 Chevrolet MalibuBase, LS4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    1997-1999 Oldsmobile CutlassBase, GL, GLS6 Cyl 3.1 L GAS
    1997 Oldsmobile Cutlass SupremeBase6 Cyl 3.1 L GAS
    1999-2005 Pontiac Grand AmSE4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22640020 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22640020 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the left rear parking brake cable on Chevrolet Malibu? Posted by Customer
    A:
    A vehicle lifting procedure should come first before conducting any repairs to the left rear Parking Brake Cable. The left rear park brake cable must disconnect from equalizer and the cable must disconnect from bracket using parking brake release (J 37043). Students should initiate the job by taking off the tire with wheel while also removing brake drums before extracting brake shoes. The parking brake release tool (J 37043) removes the park brake lever cable from the backing plate. At the same time remove the cable from the backing plate to the park brake lever using this tool. Connect the cable first to the backing plate and second to the park brake lever for installation. Proceed with brake shoes installation followed by brake drums installation along with tire wheel assembly reinstallation. The installation process ends with connecting cables to bracket components and cables to equalizer elements followed by lowering the vehicle. Installation of parking brake adjustment is unnecessary because the system automatically adjusts itself while occasional rear brake adjustments might be needed for system tension optimization.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Left Rear Parking Brake Cable on Chevrolet Malibu? Posted by Customer
    A:
    The first step to change the left rear Parking Brake Cable involves vehicle suspension and support. The parking brake release tool (J37043) helps disconnect both the left rear park brake cable from equalizer as well as the cable from bracket. Initiate the procedure by taking off the wheel and tire then the brake drums before removing the brake shoes. Perform the procedure by removing the cable from the backing plate through the use of the parking brake release (J37043) after detaching the cable from the park brake lever. The installation process starts by attaching the cable to the backing plate then proceeding to the park brake lever. After brake shoes installation proceed with brake drums before attaching the tire and wheel assembly. Complete the installation process by attaching cables to bracket and cable to the equalizer and following by lowering the vehicle until stable. The system operates through self-adjustment therefore parking brake adjustment is unnecessary but rear brake tension might need adjustment through the normal process.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after installing the brake components for the 2003 Chevrolet Malibu? Posted by Customer
    A:
    Install the tire and wheel assembly, connect the right rear park brake cable to the bracket, and connect it to the cable connector before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the first step to replace the front park brake cable for the 2000 Chevrolet Malibu? Posted by Customer
    A:
    Begin by removing the left sound insulator and the left carpet retainer, then position the carpet and sound deadener aside.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you disconnect the left rear park brake cable for the 2002 Chevrolet Malibu? Posted by Customer
    A:
    Disconnect it from the equalizer and then from the bracket using the Parking Brake Cable Release Tool (J 37043).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What are the final steps after installing the park brake cable for the 2001 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the park brake pedal and nuts, followed by the PCM and bracket, then the carpet to the left side of the vehicle, the left carpet retainer, and finally the left sound insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rear Cable 22640020 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22640020 Rear Cable is available in the market under the name GM Parking Brake Cable. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22640020 Rear Cable fits certain Chevrolet Malibu models, as well as Pontiac Grand Am. Additionally, it is compatible with Oldsmobile Cutlass, Cutlass Supreme models.
The original GM component designated by manufacturer part number 22640020 maintains top performance when functioning as the Cable, Parking Brake; Brake Cable unit at its Rear. The component 22640020 is constructed from durable material and its dimensions span 35.3 x 2.8 x 0.8 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 22640020 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 22640020. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.